Will the Replacement Handle Latch for Cam-Door Lock Work With a Hidden Shackle Style Lock
I was talking about the puck hidden shackle style lock | It looks like most of the hidden style shackle padlocks come with their own hasp that is designed specifically for that lock therefore I do not think this would work with the Replacement...
Width of 72 Inch Polar Hardware Continuous Hinge
Do I measure the hinge width while open or from the center hinge? | The 72 inch long Continuous Hinge # PLR846 measures 2 inches wide when totally flat, so about 1 inch on each side of the 1/8 inch pin. |
Recommended 6 Foot Long Continuous Door Hinge for a Trailer
I need a continuous hinge 1-1/4x1-1/4 x 6foot with the knuckle about 1-3/4, do you have anything close. | The best option we have for you is the Continuous Stainless Steel Hinge part # SH300. This hinge is 6' long, 3" wide, and has 1" long knuckles....
Diameter of the Top of the Replacement Bottom Lug for Polar Cam-Action Latch Kit
Hello, can you tell me the diameter of the top of the lug? I want to make sure it will fit into my latch bar. Thanksgilbert | I went out to the warehouse and found that the top of the Replacement Bottom Lug # PLR158-206-SS has a 0.79" diameter....
How Does Enclosed Trailer Vent Keep Rain Out of Trailer?
I have a 7 by 16 foot enclosed Forest River trailer that I want to put sidewall vents on. I read in a comment on your website that they recommend to put one in the front of the trailer facing forwards and one in the back of the trailer facing...
Can Polar Hardware 6' Continuous Steel Hinge be Cut to Length
Can the six foot continuous or piano hinge be cut down into shorter for smaller applications? | Yes you can cut the 1-1/2" Wide Continuous Steel Hinge, 6' Long # H150 to length for your smaller applications. |
Picking Out Replacement Cam Door Handle for Horse Trailer Door Ramp
Trying to find this door handle. Its on a horse trailer with a ramp. Its 1-1 1/4inch wide around 13inch long | For what you are looking for the Handle Assembly for Polar Cam-Action Latch Kits # PLR158-100-A is the best option. It is right the...
Diameter of Post on Ramp Door Hinge # PLR1902
Hello, Can you please tell me the size of the post this hinge rotates around. I need to Cut this to make it fit my existing trailer. Thanks PLR 1902 | The diameter of the post on the Ramp Door Hinge # PLR1902 that you referenced is 1 inch. I...
Is the HitchMate Boat Trailer Step HE4036 Available in Aluminum or a Galvanized Finish?
Is this step made in aluminum or galvanized for saltwater appllication? | The HitchMate Boat Trailer Step # HE4036 does only come as powder coated steel. This will offer corrosion resistance, but it will also need to be kept clean to keep this...
Height of Upper and Lower Cam Brackets of Polar Cam Action Door Latch Kit # PLR658-002
how much clearance under the door is necessary to mount the receiving brkts? How tall are they? Thanks | The height of the Polar Cam Action Door Latch Kit # PLR658-002 brackets you referenced is 2 inches so you'd need 2 inches basically above...
Recommendation for Making a 45 Inch Cam Door Latch
My trailer has a 45inch bar - suggestions?? | I have a solution for you, but it will require you to supply your own 45 inch long 3/4 inch inside diameter pipe. You will want to get the Universal Cam-Door Lock for Enclosed Trailers # 383200....
Hinge for Butterfly Gate That Allows 270 Degree Swing
Would these PLR1904-Z hinges work for a butterfly gate on the end of a livestock trailer... where the gate would swing roughly 90 degrees to the inside of the trailer and roughly 180 degrees to the outside of the trailer? | While we do have...
Recommended 16 Inch Strap Hinge for Enclosed Cargo Trailer
I have a Classic cargo trailer with 16inch strap hinges on the passage door, they only have 2 holes and center to center is 7.5, out towards the end of the strap. Do you stock this, and if not can you tell me who makes it? | I cannot give you...
Is Hardware Included with Polar Replacement Hasp # PLR158-102-A
Does this hasp also include the hardware required for typical install? | The Polar Replacement Hasp # PLR158-102-A that you referenced does not include the hardware needed to install the unit. The specific hardware size that will be needed really...
Replacement Handle Solution for Cam Door Latch on Rear Door of RV
I have a continental cargo covered utility trailer that I use for towing snowmobiles around. It is a 2013. The back door comes down like a ramp for loading. when it is shut it is secured on each side by a handle that engages and upper and...
Replacement Ramp Door Handle for a Horton Enclosed Trailer
I have a Horton Trailer model H612TA. I need to replace the handle on the back ramp that s down. I cant find it on your site. Can you help? | After doing some research on Horton trailers, it looks like most of their enclosed trailers use...
Determining Replacement 270 Degree Door Hinges For 2004 Trailet Two Horse Trailer
I have a 2004 Trailet two horse straight load horse trailer with a ramp. Trailet has been out of business many years so I have no hope of finding the actual parts. I need to replace the top back door hinges. I think the long hinges that swing...
Replacement Hinge Options for a Featherlite Horse Trailer
looking for replacement hinges for a fetherlite horse trailer. the number on hinge is #13010. what have you got | We have a variety of door hinges that can work for your Featherlite horse trailer, but I wasn't able to find anything related to...
Ramp Hinge PLR1902 For Making Swing Out Trailer Barn Doors
Hello, We are looking for barrel hinges that could be used for double doors at the tailgate on a utility trailer. They would need to swing out so that the doors swing 225 degrees all the way to the side of the trailer. Also looking for something...
What Type of Hardware Needed When Installing Universal Cam-Door Lock for Enclosed Trailers # 383200
Hi what types of bolts/fasteners do you suggest for this part? | The hardware you'd want when installing the Universal Cam-Door Lock for Enclosed Trailers, item # 383200 really depends on the application. I'd recommend carriage bolts through...
Is There a Solid Steel Bar Connection to Cam Holder for 10K Dump Trailer Available?
I am looking for a replacement lower cam for a 10k lb dump trailer. This trailer does not have a pipe for the cam action, it has a solid steel round bar. Is this a replacement piece that you carry? Thanks in advance. | It sounds like you...
Why Doesn't Enclosed Trailer Door Hook and Keeper # 383400 Come with Install Screws
Why doesnt it come with new screws? | The Enclosed Trailer Door Hook and Keeper # 383400 does not come with new screws because different applications will require different fastener styles and lengths. So instead of giving screws that would...
What is the Length of the Rods of the Deadbolt Latch
Im looking for a latch similar to this one to fit an emergency exit door on a trailer , the door should be 3foot x 2. is this length of 36inch is the over all rod size? or times two for each rod. | The Deadbolt Latch with Inside Safety Release...
Deadbolt Latch for Enclosed Trailer
Do you sell a side door lock/dead bolt as addition to my factory bar lock it is an interstate cargo trailer thank you | We have the Deadbolt Latch with Inside Safety Release for Enclosed Trailers # PLR7011S which is designed for rear and side...
Filter Your Search
Contact and Help