Will the Bedliner Need to Be Removed for PAL3600 Installation for 2006 Mitsubishi Raider
I have a bedliner installed in my 20006 Mitsubishi Raider, and it covers then inside of the tailgate. Will I have to remove the bedliner to install the tailgate lock? | You will need to be able to access the three bolts on the inside of the...
Recommended Transmission Cooler For 2006 Mitsubishi Raider
Installation of external transmission cooler on a 2006 mitsubishi raider with factory tow. What extra fittings might I need for install and what kit would be best | For your 2006 Mitsubishi Raider, the Derale Series 9000 Plate-Fin Transmission...
Trailer Wiring Harness Recommendation for a 2007 Mitsubishi Raider
I need to add a 7 wire harness to my 2007 Mitsubishi Raider pick up so I can pull a small camper. The truck does not have a factory wireing harness for towing. Which harness would be the best for me to use. | For a 4-way wiring harness recommendation...
Wiring a 4-Way connector on a 2006 Mitsubishi Raider
I dont know collor code to my truck Mitsubishi Raider 2006 | The taillight wiring colors for your truck could be any color, manufacturers change wiring colors for many different reasons and often within the same model year. To determine the...
Electric Brakes On Trailer Working Intermediately With 2006 Mitsubishi Raider
I have an issue with my trailer brakes working only when they want to. Ive tested the controller as stated, checked red and black for power, severed the blue wire, its working properly. As I drive trailer brakes will start to work sometimes...
Can 2008 Mitsubishi Raider 2WD be Flat Towed with Driveshaft Disconnect
I have a 2008 Raider 2WD with a drive shaft disconnect. I currently tow it on a dolly. I would prefer to tow it 4 down but cant find base plates. Any suggestions? Thanks | If you have a rear driveshaft disconnect on your 2008 Mitsubishi...
Install Instructions for GloLight LED Trailer Tail Light
Hello! Can you provide install instructions? | To install the GloLight LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 32 Diodes - Round - Red Lens # STL190RB you just need to match the wires by color or function. On the light: white...
Tool Box Recommendation for a 2006 Mitsubishi Raider That Fits Below the Rails
I need a tool box for the bed if my truck but I want it to fit comfortably inside I dont want it showing | I have found several toolboxes that will fit your 2006 Mitsubishi Raider, however, the DeeZee Toolbox # DZ8748HDS is not one of them that...
Can Weather Tech Bug Shield Survive Going Through Car Wash
Will I be able to go through the car wash after its in place. | Yes, the Weather Tech Easy-On Stone and Bug Shield Deflector # WT50150 that you referenced is sturdy enough and mounts sturdy enough to survive going through a carwash. |
What are the Dimensions of the 2006 Monaco LaPalma Roadmaster Rear Anti-Sway Bar RM-1259-109
My motorhome is an 06 Lapalma diesel pusher...34 Im pretty sure the Roadmaster 1259-109 is the bar Im needing... Question... Can you give me the length of the arm from the center of the torsion bar...ive measured the chassis and it appears that...
Does Trailer Wiring for 2007 Mitsubishi Raider Sense Varying Voltage for Brake Light Activation
I have a few questions about the 118323 combined lights and brakes 4 way connector harness for my 2007 Mitsubishi Raider. 1. Is the brake lights intensity changed based on the amount of power going to the brakes? 2. Description indicates that...
Parts Needed to Install a Trailer Brake Controller on a 2006 Mitsubishi Raider
How to in stall a Prodigy P2 brake controller on a 2006 Mitsubishi Raider with Factory Tow Kit..Cant find a quick connect. Can I use one made for Dodge Dakota? I do have a v8 if that makes a differance.. | I spoke with my contact at Tekonsha...
Replacement Jam Nut for 19F0J Wheel Liners
My wheel studs are 3/4”. I ordered the 19f0j which has approximately 1/2” threads. I can’t find the specs on it. | Since you said you ordered the 19F0J wheel liners then you need part # WM9073 instead as this is the correct fit for them and...
Tool Recommendation for Shortening Length of Ventline Roof Garnish
Question: Im trying to determine which garnish trim that I need for my 2000 Fleetwood Southwind Storm 30H. The roof is 4inch inches thick and the garnish that I need to replace is 4-1/2inch in height. Which garnish trim do I need? asked by:...
Recommended Flat Towing Setup For 2009 Chevy HHR Behind 2005 Monaco Motorhome
Hi, I have a 2005 Monaco Motorhome that I recently purchased. It came with A Roadmaster Stowmaster tow bar. I have the tow bar, safety cables and wire harness on the RV. I intend to tow a 2009 Chevy HHR not SS. I also have the brackets which...
Filter Your Search
Contact and Help