!Liberty Travel Trailer x > Raider x > !Esteem x > !Softail Slim x >

Does Trailer Wiring for 2007 Mitsubishi Raider Sense Varying Voltage for Brake Light Activation

I have a few questions about the 118323 combined lights and brakes 4 way connector harness for my 2007 Mitsubishi Raider. 1. Is the brake lights intensity changed based on the amount of power going to the brakes? 2. Description indicates that...

Can Weather Tech Bug Shield Survive Going Through Car Wash

Will I be able to go through the car wash after its in place. | Yes, the Weather Tech Easy-On Stone and Bug Shield Deflector # WT50150 that you referenced is sturdy enough and mounts sturdy enough to survive going through a carwash. |

Recommended Transmission Cooler For 2006 Mitsubishi Raider

Installation of external transmission cooler on a 2006 mitsubishi raider with factory tow. What extra fittings might I need for install and what kit would be best | For your 2006 Mitsubishi Raider, the Derale Series 9000 Plate-Fin Transmission...

Wiring a 4-Way connector on a 2006 Mitsubishi Raider

I dont know collor code to my truck Mitsubishi Raider 2006 | The taillight wiring colors for your truck could be any color, manufacturers change wiring colors for many different reasons and often within the same model year. To determine the...

Parts Needed to Install a Trailer Brake Controller on a 2006 Mitsubishi Raider

How to in stall a Prodigy P2 brake controller on a 2006 Mitsubishi Raider with Factory Tow Kit..Cant find a quick connect. Can I use one made for Dodge Dakota? I do have a v8 if that makes a differance.. | I spoke with my contact at Tekonsha...

Electric Brakes On Trailer Working Intermediately With 2006 Mitsubishi Raider

I have an issue with my trailer brakes working only when they want to. Ive tested the controller as stated, checked red and black for power, severed the blue wire, its working properly. As I drive trailer brakes will start to work sometimes...

Can 2008 Mitsubishi Raider 2WD be Flat Towed with Driveshaft Disconnect

I have a 2008 Raider 2WD with a drive shaft disconnect. I currently tow it on a dolly. I would prefer to tow it 4 down but cant find base plates. Any suggestions? Thanks | If you have a rear driveshaft disconnect on your 2008 Mitsubishi...

Will the Bedliner Need to Be Removed for PAL3600 Installation for 2006 Mitsubishi Raider

I have a bedliner installed in my 20006 Mitsubishi Raider, and it covers then inside of the tailgate. Will I have to remove the bedliner to install the tailgate lock? | You will need to be able to access the three bolts on the inside of the...

Tool Box Recommendation for a 2006 Mitsubishi Raider That Fits Below the Rails

I need a tool box for the bed if my truck but I want it to fit comfortably inside I dont want it showing | I have found several toolboxes that will fit your 2006 Mitsubishi Raider, however, the DeeZee Toolbox # DZ8748HDS is not one of them that...

Trailer Wiring Harness Recommendation for a 2007 Mitsubishi Raider

I need to add a 7 wire harness to my 2007 Mitsubishi Raider pick up so I can pull a small camper. The truck does not have a factory wireing harness for towing. Which harness would be the best for me to use. | For a 4-way wiring harness recommendation...

Install Instructions for GloLight LED Trailer Tail Light

Hello! Can you provide install instructions? | To install the GloLight LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 32 Diodes - Round - Red Lens # STL190RB you just need to match the wires by color or function. On the light: white...

<< Back to Results

Filter Your Search