Replacement Waste Valve Body for 2008 Tiffan Allegro Bay
Will this valve fit a 2008 Tiffan Allegro Bay? | Thanks for the picture! That makes it pretty easy to determine that the Valterra Bladex Waste Valve part # T1003VP that you referenced does replace what you have currently. |
What Are the Weighted Straps for With the Adco SFS AquaShed Cover for Class A RV
I put my cover on my rv yesterday I had 4 extra long straps for it what are they for and do you have a picture the way it is to be strap down | The Adco SFS AquaShed Cover for Class A RV part # 290-52206 comes with four weighted straps as...
How is Replacement RV Weatherstripping Picked Out for Windows
I ed the Tiffin Allegro Bay and the pictures are totally different from the ones I removed from the motorhome. Are these replacements which are different? | We don't have the window weatherstripping in our fitguide so you'd need to match what...
Which SumoSprings Fit A 2009 Tiffin Allegro Motorhome Built On Freightliner FRED Chassis
Looking for sumo springs for above motor home | Since your 2009 Tiffin Allegro was built on the Freightliner FRED Chassis you will need the SumoSprings Solo Custom Helper Springs - Rear Axle # SSR-502-54 you were looking at for the rear, and...
Replacement Kwikee Step Module 909513 for 1995 Allegro Bay Motorhome
Need a replacement brain for electric steps Kwikee 909513 | We've checked with Lippert before and the correct replacement control module for your Kwikee Steps with Control Module 909513 is the Lippert Components Kwikee Control Unit part # LC379606...
How Can I Carry Two 10 Speed Bikes On A Motorhome While Pulling A Tow Dolly
I have a 2003allegro bay 36 ft motorhome. I am pulling a tow dolly. I would like to know what bike racks I can get to hold 2 10 speed bikes. | My recommendation would be to add an adapter. Something like the Gen-Y Adjustable 2-Ball Mount w/...
Replacement 15-Tooth Lippert Slide Out Gear Pack For A 2009 Tiffin Allegro QBA35
My front driver side gear pack shaft broke. I took in off and have a 15 tooth gear. Im not sure if its been replaced before I owned her. The Lippert sight suggests it should be a 18 tooth. Can a 15 and 18 be used as long as they are the same...
Replacement Vent Lid Recommendation for Fan-Tastic Roof Vent
I have 3 lfbv8100 fantastic fan I need cover for. They are 14 3/4 x 14 3/4 outside dimension I dont see that listed | For your Fan-Tastic roof vent the correct replacement lid is the part # FVK1020-19 that you referenced. It's outside dimensions...
Replacement Step Gear Motor for Kwikee Series 25 RV Steps
Good morning. I have installed a model 216945 on my RV and broke the small gear of the electric motor. Is it possible to buy only this gear without having to change the entire electric motor? Thank you. | Since you have a Kwikee Series 25...
Backup/Observation Camera Kit Recommendation 2008 TIffin Allegro Bay 38TGB
I have a 2008 Tiffin Allegro Bay 38TGB with an old Triplevision backup monitor. I dont see a model number on it but it is color and 7 wide LCD. Is there a plug and play monitor I can get to replace it? | Since we don't have a plug and play...
SnapPad Kit for 9.9" Diameter HWH Jack Feet
Will a 10” snappad work on a HWH 9.9” dia. Jack pad? | We have exactly what you're needing, Rex! For your 9.9" diameter HWH jack feet you need the SnapPad HiWay 10 Jack Pads for HWH and Atwood Leveling Systems w/ 10" Round Jack Feet # SN58FR. |
Overall Width Of The Roadmaster D-Ring Adapter # RM-035-1
What is the overall width of the RM-035-1 adaptor where the pin goes through? Im wondering if the RM-035-1 adaptor Roadmaster Nighthawk Tow Bar will fit between the Roadmaster crossbar openings on my 2014 Honda CR-V. Unfortunately I dont...
Is There a Plug-In Brake Controller for a 2009 Tiffin Motorhome on Workhorse Chassis
2009 Tiffin Allegro Open road 34TGA Workhorse chassis. IS there a plug and play e brake controller kit? Or what parts do I need to add a controller. I have the factory tow package with the 7 pin connector with the brake wiring already to the...
Filter Your Search
Contact and Help