!Liberty Travel Trailer  x   >   !CR-V  x   >   !IS Turbo  x   >   Reese  x   >  

Looking to pull a 16500# fifthwheel. 2023 ram 2500. The truck has pucks and gooseneck. What setup do you recommend? | The hitch I love for your 2023 Ram 2500 long bed with the puck system is the Reese M5 series 5th Wheel Trailer Hitch # RP30918...

Hello, Can you tell me the distance from the hitch pin where the shank would mount to the receiver hitch to the hitch ball mount? I am looking for a weight distribution hitch, but I need one that has a distance of at least 16 inches that would...

We have a gooseneck hitch on our truck the truck bed is 6ft will the 71/2 inch adapter fit our truck? Or does it need to be the 9inch rv2? | The 7-1/2 inches of offset that the Convert-A-Ball Cushioned 5th-Wheel-to-Gooseneck Adapter w/ Offset...

I bought a used 2012 f350 crew cab. There are already holes in the bed and the hitch store I went to says all the stuff for a hitch is under the truck. The problem is the hitch techs said they dont know what brand of hitch I need for the truck...

When tightening conical washers on my new hitch, should they flatten when torqued down? | Conical washers, like the Reese Washer # 01292-008, will flatten to some extent when the bolt is torqued down to specifications. They aren't necessarily...

i have a 30 ft 5th wheel with a 1621HD box towing with a 2500 HD diesel with a short box looking to replace the factory one with a upgrade do i go with Reese or Lippert ? thanks | Since you will be towing your trailer with a short bed truck...

We own a 27.5 Premier Tracer. The unloaded trailer weight is 6322lbs. We tow it with a 2015 Dodge Ram 1500 Big Horn. The trucks towing capacity is approximately 9000#. We are currently using an inexpensive weight distribution hitch, but would...

with lippert pin box #lipp1621.. what sidewinder pin box...sw19k? | The 20,000 pound Sidewinder that will replace a Lippert 1621 and a 1621HD pin box is the # RP34FR. |

I have a 31foot trailer that I thought I would mount two of the Friction Sway control Kits on. I need the sway control bracket for 2inch mounts but it seems to only have the one hole on the passenger side for the kit ball. Do they make a bracket...

I have a 2013 ram 2500 diesel with a 2 1/2 in reciver and this part dont fit. It comes in les than half an inch and it gets stock, had to get a hammer to get it out! | The factory 2-1/2 inch receiver on the Ram and Ford trucks have more rounded...

I am looking for a custom 5th wheel hitch mounting kit with rails that does not require frame drilling. My truck is a 2008 Dodge Ram 2500 4x4, 5.7L GAS, quad cab, short bed, NOT mega cab. Any info would be appreciated. I have to self-install...

I have a 2006 Ford F150 Supercrew 1/2 ton towing a 2017 Forest River Cherokee Wolf Pup 16BHS. I know I dont need a weight dist. hitch w/sway control, but would like to get one anyway. What size hitch do you recommend? Thanks! | Ideally when...

Brophy Hitch Extender HR26 says 500lb tongue weight and 1000lb WD tongue weight. My 2017 Ford F250 says that it does not need a WDH for the same 1500 max tongue weight. Can I pull a small travel trailer with a 550lb tongue weight and not use...

Are Reese friction type sway controls compatible with Curt hitch heads and visa versa? | Yes, the Reese sway control bracket, # RP26003, will accept the small ball on Curt friction sway control bar, # 17200. The bracket accepts a ball with a...

We currently have a Reese 1,200lb/12,000lb trunion bar WD hitch setup using friction sway control. We just picked up our new TT last night and have a ton of sway on the freeway. Our old TT was only 5,000lbs and 550lb TW, and we had no sway....

Can I find an adapter to use my Reese RP30047 16K 5th wheel hitch on my new 17 F250 with the Factory installed 5th wheel prep with the rails under the bed? | To use your Reese 5th Wheel Trailer Hitch # RP30047 on your new 2017 Ford F-250 with...

Do these brackets go on the inside or outside of the frame rails? | The Reese 5th wheel frame brackets # RP58386 mount on the outsides of the frame rails on a 2009 Ram 1500. I have included a link to the installation instructions for you to view. |

Hi, looking to add a wdh to tow a 2017 Jayco 145rb baja with my 08 Kia Sorento. Tongue weight will be between 400-500 lbs, would like sway control, as well. Which hitches would work? | The Strait Line system part # RP66082 would be perfect...

I installed this rail kit with a Curt Q20 hitch about 4 years ago. Now I Need to remove the frame brackets in order to install Ride Rite 2597 Air Helper Springs on my 2014 F-250. Apparently the bolts on the frame/ bracket were torqued down very...

need to install my 15k reese fifth wheel slider in my 2016 ford f250 superduty short bed, I have the rails just need under bed kit. not sure what part I need? my hitch and rails are 17 years old is that ok? | Due to the age of your rails you...

I have a 2017 Ford F350 with bed pucks and a pullrite model 2900 super glide 5th wheel. I need the adapter to hook the two together. thank you | The Pullrite 2900 is designed for industry standard 5th wheel rails. That means that the adapter...

I have short box dodge with ram boxes Do I need a slider hitch ? Or I will the sidewinder give you enough clearance for turning? | A sliding fifth-wheel hitch is not needed when using a Sidewinder. A Sidewinder will move the pivot point 22...

If I have a LineX spreayed in bed liner, do I need to place the galvanic isolater strips on the Reese bed mount rails? I have the aluminum bed 2017 f-150. I realize under the bed mount require the isolation on the shims. | A sprayed-in bed liner...

Will the rails fit in a 1998 Dodge 2500. Long bed pickup? | For a set of fifth wheel rails confirmed as a fit for your 1998 Dodge Ram 2500 long bed we have the Reese kit part # RP30035 but the Curt kit you mentioned is not a fit. Check out...