!Jetta Wagon  x   >   AMG  x   >  

Will this hitch cover fit a 2009 nissan Armada | As long as the opening of the receiver hitch measures 2 inches by 2 inches, then this hitch cover, # AMG100147, will fit inside the hitch. I have linked a video review of this hitch cover for you. |

I'm a big batman fan, will this hitch cover fit on my 13419 receiver | Yes, the Batman Logo Trailer Hitch Receiver Cover # AMG102808 you're looking at will fit just fine in your Curt Trailer Hitch Receiver # C13419. |

Does this have a locking pin with it and will it fit a Toyota 4 Runner. If it doesnt have a locking device on it do you have one? Want to get this for my husband for Christmas and dont know what size to get and want it to be theft proof. |...

I have the Draw-Tite 75614 on my 2012 Acura MDX, I am wondering what would be the best hitch pin to attach this hitch cover.. There are 2 holes in the hitch receiver - a 1/2inch hole at approximately 1 inch and a 5/8inch hole at approximately...

I am renovating a hitch receiver cover that needs a new seal. | It sounds like you are looking for a replacement hitch cover gasket like the part # AMG-FM. This is designed to fit AMG hitch covers but depending on what you have could be trimmed...

Was wondering if you still have the Fighting Sioux Head style receiver hitch cover. Your web site only shows the Standard interlocking ND North Dakota style. | While we do carry the North Dakota 2" Trailer Hitch Receiver Cover - Chrome Emblem...

I recently purchased a MSU Spartan Trailer Hitch Cover as a gift for Christmas. The Customer Rep on the phone suggested a Pin and Clip to hold it in place. For the life of me, I cannot figure how the two work together. As I said, this is for...

WHER CAN I BUY THE VFW EMBLEM THATS ON THE VFW HITCH COVER. I HAVE THE HITCH COVER. I WAS LOOKING FOR THE EMBLEM IT SELF. I PURCHASE BOTH BEFORE, JUST NOT SURE WHERE. | I do have a VFW hitch cover for you like the VFW Seal Trailer Hitch Receiver...

I am purchasing a Texans hitch cover for my husband, and I would like to get a locking pin for it. Do you have one that fits a 2012 Toyota Tundra? | The 2012 Toyota Tundra calls for a 2-inch trailer hitch receiver. We offer a number of Texas-...

Looking for 2nd class hitch hitch cover on a VW Tiguau | To see all of the hitch covers we offer that are designed to fit 1-1/4 inch hitches like the Class II hitch you have on your 2013 Volkswagen Tiguan you will need to click the attached...

AH-41008 Is this cover lockable with a pin? | Yes, to lock the University of Wisconsin Emblem 2 Inch Trailer Hitch Cover # AMG102646 to your hitch receiver, I recommend our etrailer.com Hitch Receiver Lock # e98880. This lock is designed for...

I am looking for a Marine lighted truck hitch cover. Do you make anything like this or can you direct me somewhere that I might be able to find one. My boyfriend was a marine I am looking to honor him by this small gift. Any help would be greatly...

Where is the cover manufactured, what country? | According to the good folks at AMG, the emblem itself use on the # AMG102202 american flag hitch cover is manufactured in Ft. Worth Texas, the backer portion that slides into the hitch is manufactured...

I have 5 to a MAX of 5 1/4 Inchs between my exhaust tips on my Corvette. HOW WIDE IS THIS Bowtie Cover? The C5 covers you have are 6 !/2inch Which wont fit. Th Air Force are ??? wide Thank You. | I have gathered the width for the following...

i cant seem to find a batman logo trailer hitch cover. Do you guys make them and if you do can you send me the picture and price for it. | We do carry a couple Batman hitch covers. We have part # AMG102808 with just the Bat Logo in chrome....

Do you have a trailer hitch cover that has the US Navy SEALS emblem? | We do carry the US Navy hitch cover part # AMG102397 (metal base) and part # AUT2-NAVY-C (stainless steel) however we do not carry a hitch cover with the traditional trident...

will this fit a class IV receiver? if not, which Auburn ones will fit? | The Auburn University Color Logo Emblem 2" Hitch Cover # AMG100062 that you referenced is designed to fit a 2 inch trailer hitch. Class IV are 2 inch hitches but it sounds...

Do you have this size in university of ky.. | AMG does now offer a 1-1/4-inch hitch cover with the University of Kentucky interlocking U and K logo similar to their 2-inch part # AMG100222. The part number for the 1-1/4-inch hitch cover is...

Does the IU trailer hitch cover come with all parts necessary to install or do I need to order additional pins/bolts/etc.? | You will need a pin and clip or a hitch lock to secure the Indiana University Logo Trailer Hitch Cover, item # AMG100178,...

Does this hitch cover have any color on it or is just black with the silver UH? | This Houston Chrome Logo Emblem # AMG100161 that you referenced has a black powdercoated background and then features the Houston overlapping U and H logo in chrome. There...

Hello, I have a chrome hitch cover similar to your product PC00225 for my 2inch trailer hitch. It came with a 3-hole mounting which is just slightly too short to meet up with the hitch pin hole. Do you sell longer mounting brackets? Thank...

Do you have this hitch with the US Army logo instead of the USMC logo? | I have some alternatives that still show American pride, but unfortunately Carr doesn't offer a hitch mounted step with the Army logo. Some alternatives would be The American...

What is the pin hole diameter of this hitch cover? | The hitch pin hole on the Iowa State Hitch Cover, # ISTHRC, is 5/8 inch diameter which is the standard size on 2 inch trailer hitches. I have included a link to all of the Iowa State covers...

I'm a serious fisherman and I want people to know that when they look at my hitch cover! What do you have for me? | I have the perfect hitch cover for you! - Bass Emblem 2" Trailer Hitch Receiver Cover # AMG102370 This hitch cover is made...