!F-150-and-F-250-Light-Duty  x   >   !Transit  x   >   Boone Outdoor  x   >  

The 2inch model includes a cover does the 1-1/4inch also it is not clear? I just ordered the 1-1/4 model today but I only want it if it includes the cover. | Yes, the Boone Outdoor Hardware Tailgate Table # BH70114 that you referenced does come...

We have the Hollywood Racks Sport Rider HR1400 and wondering if this storage rack would work to store the two main sections of the bike rack separately. i.e. the main 2-bike attachment with 2 bikes on top or bottom and the add-on 2-bike attachment...

I just received Part #D-55007. It is very loose and rattles a lot. Will this wedge work with a vertical ball mount? Thx | As long as the Vertical Drawbar part # D-55007 is being used in the correct Curt Hitch part # C11748 you can use the...

Greetings, i recently purchased Camco Hitch Mount Flagpole Holder — 2 in. Receiver Mount, Model# 51611 The mount accepts a flagpole up to 2inch inches wide at the base. Im considering using this flagpole with it. How wide is the flagpole...

It says you can fly two individual flags on two sets of clips, but it doesnt say what size flags? Also, how long is the flat, drive on section of the base? Is the base and flag pole gauranteed? | The snaps will slide on the pole some so the...

Is the angle of the docking station fixed, or variable? How far away from the wall must the foot be mounted? | Boone states that as long as the bottom plate of the Boone Docking Station Bike Rack Storage # BH92422 touches the ground it can...

our flagpole is 1.25 in diameter do you have a base that would fit so the wind wont knock it around | The GameDay Tailgating Drive-Up Flag Pole Base # 79553 would work well for you as it can fit flag poles that are up to 1.875 inches in diameter....

How much does the whole thing weigh and what are the dimensions? | The Boone Outdoor Hardware Tailgate Table # BH70114 referenced in your question weighs only about 22 pounds. The table top itself measures 20 inches wide and 48 inches long....

How does each section of the pole lock in place as you raise it to its full height? | I went out to the warehouse and pulled Sports Fan Telescoping, Fiberglass, Multiple Flag Pole # 94999. When you extend the pole it locks into place with friction....

Will a Curt 18153 60 in. x 24 in. Steel Basket Style Hitch Cargo Carrier for 2 in. Receiver fit on the bottom dock between the dock and the wall backward facing storage similar to that pictured in the two videos if the cargo carrier is in the...

Hi, I have a Curt C11330 trailer hitch installed on a 2008 Scion tC. I need to install a 1-1/4inch to 2inch hitch adapter and was deciding between the Brophy HTAD and HT5R. My preference is the HTAD because I dont need any additional rise,...

Does Boone Outdoor Tailgate Table work with 2 inch trailer hitch? If not will an adaptor cause it be wobbly? other thoughts? Will it work for the car above re: using the trunk as our seats? | You can indeed use a hitch adapter to pair a 1-1/4"...

Hi, i am looking for an anti wobbling device for Yakima BigHorn 4-Bike Hitch Mount Rack. used with 1.25inch hitch. What can you recommend Thanks, | To reduce the movement in the trailer hitch with your Yakima BigHorn 4-Bike Hitch Mount Rack,...