Will the Draw-Tite Hitch # 75034 Work on a 1978 Chevy C-10
Will this hitch fit 1978 c-10 2 wheel drive heavey duty suspension factory installed stepbumper with no modifacations needed for installation of this hitch? | The only modifications you will need to make on your 1978 Chevy C-10 2WD to install...
What Class IV Hitch Is Recommended For 1995 F350 Flatbed With 4 Inch Channel ICC Rear Bumper
I have a 1995 F350 flatbed with 4 channel ICC bumper 4 vertical channel welded to each frame member and flatbed and a 4 x 60 channel welded to bottom of vertical channels. What class 4 hitch would you recommend? | You will need to measure the...
Trailer Hitch Recommendation for a 1981 Mercedes-Benz 300TD Wagon
I have a 1981 300TD Wagon, other sites say this hitch will fit, but it is not coming up in the search on this site. I am just wondering if it will fit? Thanks, | The only hitch that we have confirmed to fit the 1981 Mercedes 300TD Wagon is...
Replacement Retention Clips For The Gorilla-Lift Utility Trailer Tailgate Lift Assist
very small pins thru the latch pins have worn out. These pins retain the springs on the pins with washers when opening the latches and holding them in the latch open position. They are very small diameter. Are they available thu you? | If you're...
Replacement Keys For Old Yakima Roof Rack
Hi I just bought an old Mercedes 1978 and it did not have the key. The only # is 049 do you have such a key? Needing to paint. Yakima | Hi, we have a simple solution. The Replacement Key for Yakima Racks and Carriers, part # Y8873-049. Once...
What are the Overall Dimensions of the Reese Unviversal 10 Bolt Fifth Wheel Rails
What is the length and width of universal gooseneck/5th wheel hitch installation rails? Thanks. | The Reese fifth wheel rails measure 43 inches long and 5-3/4 inches wide. |
Filter Your Search
Contact and Help