Replacement Taillight Lens Recommendation for 1986 Fleetwood Southwind
have a taillight cover missing on 1986 fleetwood southwind, but one that comes up in search looks nothing like it horizontal array of three covers 2 red one clear - missing one red - outer driver side do you have such a part? thx | We probabaly...
Replacement Soft Top Recommendation for a 1987 Suzuki Samurai
Complete soft top kit for 1987 Suzuki Samurai including the hardware as well as the fabric and fasteners. Please let me know if you can supply these or if not perhaps you may be able to aid in the search. Thanks | We don't carry the replacement...
Will Lippert Slide-Out Controller Work To Bypass Factory Slide-Out Wiring
Hello, I have a well cared for Fleetwood Southwind Class A RV Coach with slideout wiring problems. I want to bypass the original wiring in the coach where the problems exist behind the walls and major components and install a controller...
Does Installation Of Base Plates For 1988 Suzuki Samurai Use Tie-Down Loops
Baseplate #1003-1 will it simply bolt up to a stock 1988 Samurai? What about the tie down loops, does 1003-1 use these? Thanks | I have attached the installation instructions for the Roadmaster Classic Base Plate Kit, part # 1003-1 for your...
Adapter to Go from 6-Way Square on Tow Vehicle to 4-Way Flat Trailer Side Connector
Is there a 6 way square male to 4 way flat female adapter available? | It sound like you want the opposite of adapter # 30104. That would mean your tow vehicle has a 6-Way square connector. What you can do is use # 37995 which has both the vehicle...
Mounting Hole Pattern of Flow Max RV Fresh Water Pump
Will this replacement pump bolt up to existing mount | I attached a picture that shows the mounting hole dimensions of the Flow Max RV Fresh Water Pump part # LC689052 that you referenced to compare to what you have now. This mounting pattern...
Recommended Sway Control For A 2008 Fleetwood Southwind Motorhome On F53 Chassis
Hi I have a 2008 Fleetwood Southwind 32vs on a ford F53. Im trying to figure out what would be the best option to get it to handle better in wind and passing trucks. Its all stock other than a read trac bar we installed. Ive looked at sway...
What Would Cause Trailer Tires Size ST205/75-14 to Wear Out on Insides
My Toy Hauler has 2 3500 lb axels totaling 7000 lbs carry capacity. On the RV sticker it states the the gross weight is 7700 lbs fully loaded of which Im not over. So are my axels able to carry 700 lbs over what they are rated for? Im having...
Replacement Spring Kit for Power Gear Jack on 2003 Fleetwood Southwind 37U
I think this is the right one for my motorhome, but want to make sure before I order anything. My rig is a 2003 Fleetwood Southwind 37U on the Workhorse chassis. | There unfortunately is not a database that tells us which specific parts like...
Manual Step Replacement Recommendation for Kwikee 32 Step On RV
1994 Fleetwood Southwind with 32 series kwikee electric steps. I want to replace with manual pull out steps. My current steps are 24inch wide with 8inch rise/ and with a 18inch high threshold, will the SMFP-2100 be a viable replacement step?...
Recommended Platform for Boat Trailer Tongue
I am looking for a boat trailer tongue walk board. | We have a few options for you to consider in a platform for your boat trailer tongue. We don't carry a specific walk board, but we do have some similar items like the following: HitchMate...
Where Does the Roadmaster Base Plate part # 1003-1 Install on a 1986 Suzuki Samurai
1986 suzuki samuria the instructions for the baseplate 1003-1 does not mention the front bumper? does the baseplate go behind the bumper and the attaches to a tow bar? | The Roadmaster base plate kit part # 1003-1 that you referenced attaches...
Flat Towing a 1990 Suzuki Samurai With Separate Tail Light Wiring
I purchased a 1990 Suzuki Samurai that has been previously wired for towing behind an RV. It is a butcher job and I will be removing it and all its splices into the OEM tail light housings and wiring. I am installing all new OEM tail light housings...
Recommended Tow Bar For Flat Towing A 1986 Suzuki Samurai
Do you have a simple tow bar for 1986 Suzuki Samurai? | The simplest option we currently offer would be the Curt Adjustable Tow Bar # C19745. This bolt-on tow bar would need to be mounted to either the frame or to a reinforced steel bumper and...
Why Would Lifting Trailer Suspension Potentially Void Trailer Warranty
While your kit seems straight forward and safe to tow, lance will void the #Warranty do you have any idea why? PS will still do this lift because at present I cannot refuel without dragging the step. Thanks | When you lift a trailer you potentially...
Can the RV Refrigerator Roof Vent Cap and Base Be Installed from the Outside?
Does this have to be installed from inside or can it be mounted to roof from outside? | The RV Refrigerator Roof Vent Cap and Base item # DMC37FR needs to be mounted to the roof from the outside. |
Recommended Parts for Flat Towing a 1986 Suzuki Samurai
I just picked up a completely stock 1986 hard top Tin Top Suzuki Samurai... It has never been set up to tow, but I got it to flat tow behind my new to me motor home Class A 2012 Fleetwood Terra 31TS... The car weighs 2200#s, so its pretty light. What...
Diode Wiring Solutions for a Flat Towing a 1991 Suzuki Samarai
Hi. I have a flat four connector on my camper. I am interested to get the right kit for a 1991 Samurai. I would like to use the integrated lighting setup and eliminate magnetic lights. Questions: Looks like I can use one of two kits if...
Difference Between 3 Terminal and 4 Terminal Solenoid
Working on aux charge solenoids on our camper. I find there are 2 types of solenoids, the 3 terminal and the 4 terminal type. I believer the 2 large terminals on both carry current from the charging location to additional batteries. If using...
Instructions For Installing Roadmaster Base Plate #1003-1 On 1988 Suzuki Samurai
Can you send instructions to install on a Suzuki Samarai? I have a falcon tow bar. Thanks. | Per your request, I have attached the installation instructions for the Roadmaster Classic Base Plate Kit, Item # 1003-1, for your 1988 Samurai. There...
Recommended Rear Anti-Sway Bar For 2005 Fleetwood Southwind 32V Built On Ford F-53 Chassis
What is the correct roadmaster rear anti sway bar for a 2005 fleetwood southwind 32V on a ford chassis? Thanks | Since your 2005 Fleetwood Southwind 32V is built on the Ford F-53 Chassis and is under 34' long you will need the Roadmaster Rear...
Base Plate For 1988 Suzuki Samurai That Fits Roadmaster 522 Tow Bar
i recently purchased a roadmaster 522 all terrain tow bar . i have a 1988 suzuki samurai which base plate would you recommend?? i am thinking the one piece would be better what are your thoughts | It sounds like you have been flat towing but...
Does Roadmaster Base Plate for 1987 Suzuki Samurai Require Cutting Bumper
Purchased the 1003-1 base plate for my 1987 Suzuki Samurai. Do I need to cut the bumper to attach the plate to the frame? Thank you | I took a look at the installation directions of the Roadmaster Crossbar-Style Base Plate Kit # 1003-1, and...
Installation of TorkLift Battery Box TLA7708R on Travel Trailer with OEM Battery Tray
What becomes of the travel trailer factory installed metal framing that is welded to the A frame? Does this box fit inside that frame? Either a single or dual battery config. | The TorkLift PowerArmor Locking Battery Box # TLA7708R does not...
Filter Your Search
Contact and Help