Westin Nerf Bar Fitment on a 1999 Ford F-150
I have a 1999 F150 XLT extended cab rear suicide doors on both sides. It came with Westin nerf step bars black than I believe are OEM. They are badly rusted, and I am looking to replace them, hopefully using the installed mounting hardware....
Trailer Connector Shows 12 Volts All of the Time on the Brake Output Wire on a 1997 Ford F-250
The vehicle wire harness on my 97 f250 has the blue wire that has 12 volts available at all times whether the truck is running or not. The voltage never changes when the brake pedal or controller are pressed. Is this correct or should the blue...
Brake Controller Installation Instructions for a 1997 Ford with Factory Tow Package and 4-Way
At the back of the truck it has a flat 4 wire conector whear does the wire from the electric brake go. | We have Instructions for the installation of a brake controller on the 1997 Ford F-150 and F-250 vehicles (see link). With a factory 4-Way...
Performance Tuner for 1997 Ford F-150 with 4.6L V8 Engine
I have a 1997 F-150 4.6 running on premium fuel. How can I adjust the computer to run reg fuel? Will this tuner let me make this change? | If your 1997 Ford F-150 with 4.6L V8 engine has not been re-tuned through use of an aftermarket programmer...
Tekonsha Prodigy P2 Brake Controller # 90885 Installation Harness for Motor Home
I have Tekonsha Prodigy controller in my pickup truck. Now have a motor-home and would like to move the unit from one to the other as we never use both at the same time. Problem I cannot find the plug for the unit to connect to the motor-home....
7-Way to 4-Way Adapter Recommendation
My trailer adapter on a 1997 f150 was crushed. It is part # F4TB12964A. Pollak is brand. I cannot find a replacement number for it. I have purchased 2 in the last 2 days and had to return them because they do not fit. Thank you! | I looked...
Will the Edge Evolution Programmer for Ford Triton V8 4.6L and 5.4L Work On My 1999 F-150 5.4L XLT?
Would this programmer #EP15051 work on my 1999 f150 5.4 XLT or would I be outta luck. Also would it work with my cold air intake. I like this one because I could use it with one of the dash pods that makes it look it came factory with it. Any...
Edge Performance Tuner for 1999 Ford F-150 XLT with 5.4L V8 Engine
Would this programmer #EP59yr work on my 1999 f150 5.4 XLT or would I be outta luck. Also would it work with my cold air intake. I like this one because I could use it with one of the dash pods that makes it look it came factory with it. Any...
Parts Needed To Install Tekonsha Primus IQ Trailer Brake Controller 1999 Ford F-150 With 4-Way Flat
Need help with wiring harness. My 1999 f150 has 4 conductor flat trailer light connector. I wish to install a Tekonsha 90160 brake controller, and need the necessary wire harnesses. | To install the Tekonsha Primus IQ Trailer Brake Controller...
Recommended 2-Inch Trailer Hitch for 1997 Ford F-150 4.2L V6
Looking for a trailer hitch receiver for my 1997 Ford F-150 4.2l v6. Which ones would you suggest? Thanks! | We offer several classes of 2-inch trailer hitch receiver for your 1997 Ford F-150 V6 and these vary in their tongue weight (TW) and...
Brake Controller Wiring Harness Needed for a 1999 Ford F-150
what wiring harness do i need for wiring harness. my old truck got total loss for insurance. I keep the brake controller from 2003 for f-250 need to change truck wiring. controll has 4 wiring, ford factory wiring has 5 wires please advise...
Truck Bed Bike Rack Recommendations for a 1999 Ford F-150 with Bed Liner
I have a bed liner installed in the back of my 1999 Lariat flair-side bed. Do you make a Swagman bike carrier which can be 1 adjusted to allow for the bed liner ? 2 Have a Swagman bike carrier for three bikes ? | You can use a truck bed bike...
Troubleshooting Power from Connector on Pickup but No Trailer Lights
I have power at the plug on the truck, but no running lights,or tail lights,or turn singals | If the connector on your pickup shows power for the lights when you test it then the issue should be on your trailer. You can verify this by connecting...
Recommended Weight Distribution System For 29 Foot Travel Trailer Weighing 7000 lbs
Have 29ft travel trailer that weighs 7,000lbs. What equalizer system should I buy? | To get you the correct weight distribution system for your trailer, we need to determine the total tongue weight. This total tongue weight includes the fully...
Is Tekonsha Ford Harness part # 118242 Sold Without 7-Way
Regarding part # 118242, I need just the harness, but not the 7 way plug. Is there another part # for just the harness portion of this kit? | The Ford Replacemenet OEM Tow Package Wiring harness part # 118242 is not sold without the 7-way so...
Recommended Tuner for Towing with a 1999 Ford F-250
I have a 1999 Ford F250 4x4 Light duty 5.4 Triton. I pull a 27foot travel trailer and I am lacking power and it shifts down real low going up hills. What tuner is best for my truck. | The best tuner we offer for your 1999 Ford F-250 is the Superchips...
Lighting Requirements for 16-Foot Trailer That Needs New Lights and Wiring
Hi, I was hoping you can help me. I am looking to purchase trailer lights with all of the functions. I need to rewire my entire trailer which is 16 and need to ensure this will go to my truck. Can you guide me to the correct wiring harness...
Recommended Replacement for Draw-Tite Activator III Trailer Brake Controller
Someone broke in my truck and got my controller. Activator 111. 1999 ford f250 is the remote available I have had it seen new and really like the model activator#111 | The best option we have to replace your old Draw-Tite Activator III Trailer...
How to Determine Wiring Functions on a 1997 Ford F-150
Code for wire harnes1997 ford f 150 | In order to determine the wiring functions on your 1997 Ford F-150, you are going to have to use a circuit tester like # PTW2993 if needed. Have someone run through the various functions in the truck while...
5th Wheel Mounting Rail Kit for 1997 Ford F-150
What brackets would I need for installation of a 5th wheel hitch in a 97 f150 long bed | You were on the right track with the Reese Universal Base Rails # RP30035 ! This kit will mount to the frame of your truck and works on both the 6-1/2 foot...
Parts Needed To Install Tekonsha P3 Brake Controller # 90195 On A 1998 Ford F-150 With Factory 4-Way
I need someone to verify an install for me if they could. I have a 98 F150 XLT with a factory tow package and 4 pin plug. I need to set it up for a toy hauler, so here is what Ive picked out. 90195-3035P Brake Controller 118242 Adapter plug...
Parts Needed to Install a 7-Way Connector on a 1997 Ford F-150
my 97 f150 had a plug under the dash for the controller i plugged in and mounted it lights up when i brake i looked under the rear of truck and there is a pair of wires with a plug that has a cap on it that are in the same shield as the factor...
Coupler Repair Kit Availability for a Trailer
I have a bent underjaw on a coupler on a lippert frame. Will this curt coupler repair kit or just the underjaw work with the coupler I have? This is on a forest river R Pod trailer. | We have several different coupler repair kits that could...
Gooseneck Trailer Hitch Installation Kit for a 1997 Ford F-150/F-250 Light Duty 4x4
Gooseneck Trailer Hitch Installation Rail Kit - Ford F-150, Part #4437, Will this kit work work for a 1997 Ford F-150 shot wheel base 4X4 truck under the bed? | To install a gooseneck hitch on your 1997 Ford F-150 4x4 you will need to use the...
Filter Your Search
Contact and Help