!Cherokee Alpha Wolf Travel Trailer x > !x3 x > !Volare x > Kodiak Travel Trailer x >

Bearing Kit For Lippert 3,500 lb Axle

Looking for the corrct part numbers for wheel bearing kits and break plates for my trailer. Also thinking of converting to wet bolts for the spring hangers. The axle is a Lippert Part # 144953. 3000LB GAWR LCI35-SB-86.5-68.5-NOSP-US-L-545-7242-18PT...

Replacement Water Pump for 2012 Kodiak 279RBSL

I am looking to replace water pump in 2012 Kodiak 279rbsl. It has a Artis pump model PDS1-130-1240E. What would you recommend. | The Artis pump you have now has a 40 psi and 3.0 gpm rating. The HydroMax RV Fresh Water Pump # P25201 is often...

Replacement Fabex 665 Pin Box Recommendation

I have a Fabex 15K King Pin box Model 665 and Im looking to get a new one. Id like to go with a different brand but I need to keep all of the same dimensions from this model, is there anything you could recommend as a comparable replacement...

Scissor Stabilizer Jack Replacement for 2015 Dutchmen Kodiak 220RBSL

Hello, I have a 2015 Dutchmen Kodiak 220RBSL and need to buy a replacement stabilizer jack for the back left but I dont know the part. This is what it looks like... JSC-30-IND | The great thing about scissor leveling jacks like the # JSC-30-IND...

Replacement Bearing Kit, Hubs and Brake Assemblies For a 2013 Dutchmen Kodiak 221RBSL Travel Trailer

I have a 2013 Dutchman / Kodiak 221RBSL. I need to replace all the wheel bearings, but do not see the 221RBSL listed. Do you have the specific bearings for my trailer? Also, what brand are your bearings? Thanks. | The Hub Bearing Kit # BK2-100...

Installation Hardware to Install a Refrigerator Vent Cover

My fridge vent for rooftop did not come with any hardware screws. | The RV Refrigerator Roof Vent Cap and Base # DMC37FR comes with the vent cap and the base. Installation hardware is not included. We do have installation hardware available....

Replacement Bolt for MORryde Suspension Upgrade Kit for Tandem Axle Trailers

I installed a MR46ZR this weekend. I got a bot zelles on one bolt and striped the threads. It was one of the 9/16 x27/8 bolts in the kit. Is there a replacement bolt for the one in the kit or should I use the 126BZ bolt? Thank You | You will...

What is the Voltage Drop of the Mighty Cord 30 Amp RV Extension Cord - 50'

I saw in the QandA that sn experts stated that it is ok to connect two 25ft 30amp RV extension cords together. What about Voltage ? What is the Voltage for two 25ft 30smp rv extension cords?? Thank you. | The voltage drop for two Mighty Cord...

Wheel Locking Lug Nuts that Would Fit 2013 Kodiak 161E Camper

Ive been searching for a lug lock nut for my 2013 Kodiak 161E camper wheels. Is item #RG01-150 a perfect fit? Thank you. | Yes the Wheel Lock Set for 1/2" Wheel Bolts # RG01-150 is a fit for the 1/2 inch wheel studs of your 2013 Kodiak 161E...

Power Jack Replacement for 2012 Kodiak Travel Trailer

Just purchased a 2012 kodiak travel trailer. 280bhsl. Someone took the power jack off and replaced it with a manual one. What power jack would I need to replace it. Thanks | While we may not have an exact replacement for the powered jack that...

Recommended 205/75r15 Bias Ply Tires for Dutchmen Kodiak Trailer

I have 205/75R15C tires on my 2015 Kodiak Rv. Do all endurance rv tires come in radial? if so, can you suggest a bias ply for the same RV? I only take short trips. Thank you | I'll start out by saying that the Goodyear Endurance tires that...

Is The HydroMax RV Fresh Water Pump A Good Replacement For An Artis Products Water Pump

Hi I have an Artis Products water pump Model #PDS1-130-1240E in my rv and was wondering if the HydroMax Item#P25201 would be a good replacement. Thank you | The Artis water pump you have has a 40 psi and 3.0gpm rating so the HydroMax RV Fresh...

Where Should Reese Bolt On Chain Hangers Install on Frame of Trailer

would I have a problem if I mounted these 1/4inch up from the bottom edge of my camper frame, as long as I have at least 5 chain links or more? I did not have the directions which say to mount 1/2inch down from the top of the frame | Reese...

Replacement Circuit Board For MaxxFan Roof Vents w/ Exhaust Only Fan

I am looking for a circuit board for a MaxxFan 10 speed fan with rain sensor and auto temp control. Exhaust only model | Since you have the exhaust only model the correct replacement circuit board is the Replacement Printed Circuit Board for...

Troubleshooting Brake Controller

I’ve adjusted the brakes. When I apply the manual brake controller that is built into my truck I can definitely feel my trailer brakes engage. When I apply the brake pedal on the truck it doesn’t feel like the trailer brakes are engaging....

Can etrailer Replacement Magnet Kit for 12" Electric Trailer Brake Assemblies Fit Lippert 12" Brakes

I have a Kodiak Dutchman with Lippert 4400 axles and it is equipped with 12 x 2 brakes and I was looking at your magnets part # AKBRBKR-M12 and was wondering if these would work? They measure the same and have great reviews. I just bought the...

How To Determine Fit of the Lippert Thin Shade Complete Window Kit

1st ,Will this fit my 2017 Kodiak 291resl? I see no dimensions for window cutout! 2nd Dose this come with the tool wedgies to remove old window? Its screwless! Thanks | The Lippert Thin Shade Complete Window Kit part # LC806621 will fit any...

Should Bolts of AP233 Suspension Kit be Greased

Hello if I order the Suspension Kit for Tandem-Axle Trailers - 1-3/4inch Wide Double Eye Springs - 2-1/4inch Links Item # AP233 Do I need to grease the bolts before installing them? if yes, with what fat? thank you | Yes, it is a good idea to...

Inverter and Air Conditioner Recommendations for a 32" Enclosed Car Trailer

Im looking at a 32foot enclosed car trailer that runs on 12v power. I was wondering what converter and a/c you would recommend for it? | Hey Shyanne, thanks for reaching out! To convert your 12V DC power to AC power for an air conditioner I...

Trailer Hitch and Cargo Carrier for Travel Trailer With Square Channel Bumper to Carry Generator

Bumper receiver. I have a 2x4 channel bumper on my 16 kodiak and I want to add a cargo rack for generator what do you recommend | We do have an option for you, though your 2" x 4" square channel bumper does not have the strength and stability...

<< Back to Results

Filter Your Search