7-Way Round to 4-Way Flat Adapter Recommendation
. Specifically, im not getting brake light but tail and turns work fine. What ive purchased/used looks like your | Hi - i have a 7 round pin plug on my truck. I am seeking an adaptor to go to a standard/common...
How To Install Curt Powered Tail Light Converter On 2017 Audi A4
and found the turn signal wires on each side. Found the tail light wire.. I cant find a brake light wire | 2017 Audi A4.. cant seem to figure out how to wire the C59236 kit I bought. Removed...
Trailer Hitch & Wiring Harness For 2004 Audi A5 Avant Wagon
Tail Light Converter with 4-Pole Flat Trailer Connector # C59236. | Hi, I am installing a hitch in an 04 Audi A4 Avant-wagon and I am wondering if I need to get a trailer wiring kit with or without a converter...
How to Determine What Wires Get Run to Curt Wiring Harness # 56201
per side going to the tail lights. Can you specify which wires to use on the left and right colours | The instructions that came with this do not specify which wires to connect to. There are 3-4 wires per side...
What Thickness Steel is Used To Construct the Curt Trailer Hitch Receiver # 11164 For 2006 Audi A4?
vehicle tail lights. It will allow you to add Auxiliary Lights # C53201 in this situation. | Hi, Im interested in this hitch Curt #11164 for my 2006 Audi A4. But Im just wondering what is the...
What is Needed to Install Curt Trailer Hitch Receiver C11169 on 1999 Audi A4 Quattro B5
and tail lights to the trailer brake and tail lights. You will also need a hitch pin and clip | What is Needed to Install Curt Trailer Hitch Receiver, Part # 11169, on 1999...
Both Signals Blink When Activating Left Turn Signal After Installing Curt Converter C59236
turn signal is insufficient ground on the Curt Powered Tail Light Converter with 4-Pole Flat Trailer | i got the wire harness 4 pin for my 2010 Audi A4 and installed. Break, Running and Right turn work good....
Comparing Wiring Harness Options For A 2015 Audi A4 Premium Quattro S-Line
Hello Ben. The Curt Powered Tail Light Converter # C59236 and the Tekonsha ZCI Harness # 119250KIT | Is this wiring kit basically the same as C59236, with the only difference being the addition of the no splice...
Hitch and Ball Mount Solution for 2012 Audi A4 for 8-1/2 inch Rise
for tail lights. brake and blinker. The top of my 1-1/4 trailer hitch is 8.5 Can you help me choose | I have a 2012 audi A4 avanti wagon with a Curtis hitch. 2000 gross trailer wt, 200lb max tongue wt I...
Recommendation for Personal or Professional Installation of a Trailer Hitch on a 2007 Audi A4 Avant
the harness to, behind the rear tail lights. The correct harness for your vehicle is the ZCI Circuit Protected | re: Curt Class I Trailer Hitch Receiver with Drawbar - Audi A4, 2007 should we plan to have this...
Filter Your Search
Contact and Help