Exhaust Modifications for 2001 Ford Crown Victoria with Dual Exhaust
This hitch for the crown vic says dual exhaust needs to be modified. What are the modifications that will need to be preformed as I have a p71 police interceptor that I would like to put a class 3 with 2 reciever on. | In order to clear the...
2 inch Hitch that Fits 1989 Ford LTD Crown Victoria
I have a 1989 LTD Crown Victoria I would like to pit a Draw Tight Hich 2inch what model would you guys recommend Thanks | For your 1989 Ford LTD Crown Victoria we have the Draw Tite Hitch # 41116 as a confirmed fit for a Class III 2 inch hitch. |
Vent Cover Needed for MaxxAir MaxxFan Vent on a 2018 Forest River R-Pod
I am trying to figure out which vent cover I will need for the MaxxAir Model 4401K powered vent fan in the bathroom of my 2018 Forest River R-Pod Model RP-176. Thanks for your time in this matter. | The rain covers that are direct fits your...
Does the iRV Wall Radio Have Bass and Treble Controls
Is there a bass/treble control or tone control on this model? | I do have what you need but the iRV Wall Radio part # 292-101809 does not allow for the ability to adjust bass and treble. Instead, I recommend the Jensen RV Stereo part # JWM60A...
Is there a Hole to Route Trailer Wiring Harness on a 1990 Ford LTD Crown Victoria
My car has the tow package says theres a 32 mm hole by rear 1/4 panel for wires to go through,i dont see it. Have you ever worked on one of these is it possible they didnt put the hole and plug in the vehicle? | We haven't had a 1990 Ford Crown...
What is the Distance between the Pinhole and the Outside Wheel Hoop of the Traveler XC2 # S64663?
Trying to determine the distance between the hole on the hitch receiver to the farthest distance from same. | I confirmed with my tech at Swagman that the distance between the center of the pinhole to the outside edge of the furthest wheel hoop...
Bearing Kit that Works for 2007-2010 TADA Dutchmen for the Al-KO Axle
This is the bearing kit others have used for the 2007-2010 TADA Dutchmen for the Al-KO Axle. The specs are as follows: Trailer Bearing Kit Consists of: 1 - A17 Bearing Set L68149/L68111 1 - A4 Bearing Set L44649/L44610 1 - 442251 Seal 1 -...
Trunk Bike Rack Recommendation for a 1990 Ford Crown Victoria
I have an older car I tease my sister tell her my bike is worth more than my car it is a 1990 ford crown Vic need a trunk rack for female bike will this work? | The Thule Passage bike rack part # TH910XT that you referenced has been confirmed...
Trailer Spindle Got a Nick In it from a Grinder Should the Axle be Replaced
I was grinding the bolts off my trailer I slipped and put a nick in the spindle is it ok or do I need to replace it or the axle? | How deep is it? It is hard to tell from the picture. You may be able to use some emery cloth and take care of...
Filter Your Search
Contact and Help