Bearing Kit that Works for 2007-2010 TADA Dutchmen for the Al-KO Axle
This is the bearing kit others have used for the 2007-2010 TADA Dutchmen for the Al-KO Axle. The specs are as follows: Trailer Bearing Kit Consists of: 1 - A17 Bearing Set L68149/L68111 1 - A4 Bearing Set L44649/L44610 1 - 442251 Seal 1 -...
Size of Bolt Used to Install Draw-Tite Trailer Hitch Receiver on a 1998 Lincoln Mark VIII
What size are the bolts that hold the hitch on,,, at the point where the exhaust re-attaches? The Curt hitch will not fit. It has 1/2 inch bolts at this point. The bracket is only 1/2” wide. I have had two here, had to send them back. Do...
Fit of Küat PVP20B Pivot 2 Swinging Extender on 2020 Mercedes-Benz SL
Can I use a Kuat Pivot 2 that swings to the passenger side on my Mercedes Sprinter 2020 4x4 with factory receiver and factory built in step. Keep in mind the factory step is approximately 15 inches wide and about 7 inches deep...
What is the Distance between the Pinhole and the Outside Wheel Hoop of the Traveler XC2 # S64663?
Trying to determine the distance between the hole on the hitch receiver to the farthest distance from same. | I confirmed with my tech at Swagman that the distance between the center of the pinhole to the outside edge of the furthest wheel hoop...
Filter Your Search
Contact and Help