Will the Thule Hull-A-Port Work on Malone Air Flow Cross Bars
Hello, I was just wondering if the Malone Air Flow 2 Bars accept the same adapters as the thule aero bars. Particularly I am looking to pair my Thule Hull-A-Port XTR with my malone air flow 2 bars. It certainly appears that the standard outfittingis...
Bearing Kit that Works for 2007-2010 TADA Dutchmen for the Al-KO Axle
This is the bearing kit others have used for the 2007-2010 TADA Dutchmen for the Al-KO Axle. The specs are as follows: Trailer Bearing Kit Consists of: 1 - A17 Bearing Set L68149/L68111 1 - A4 Bearing Set L44649/L44610 1 - 442251 Seal 1 -...
Size of Bolt Used to Install Draw-Tite Trailer Hitch Receiver on a 1998 Lincoln Mark VIII
What size are the bolts that hold the hitch on,,, at the point where the exhaust re-attaches? The Curt hitch will not fit. It has 1/2 inch bolts at this point. The bracket is only 1/2” wide. I have had two here, had to send them back. Do...
Vehicle Cover for a 1948 Ford F1 Short Bed with Bumpers
I have a show quality 1948 Ford F1 with a short bed and bumpers that measures 188inch in length. Truck also has twin side mounted rear view mirrors and is always stored inside. Should I order the 188inch max cover or the longer version and...
What Hitch WIll Fit My 1954 Ford F100
I am looking for a hitch for my 1954 ford f100 pickup. The outside edge of the frame measure 34 inches | With you 1954 Ford F100 having a 34 inch frame I recommend the B&W Heavy-Duty trailer hitch # BWHDRH25198. It is a 2 inch receiver and drops...
Recommended Hitch for a 1956 Ford F-100
Looking for a trailer hitch that will fit my 1956 Ford F100. The outside width of the frame rails is 34”. So something that will bolt up to that will probably work. Thanks, Donn | We don't have any custom fit hitches for a 1956 Ford truck...
What is the Distance between the Pinhole and the Outside Wheel Hoop of the Traveler XC2 # S64663?
Trying to determine the distance between the hole on the hitch receiver to the farthest distance from same. | I confirmed with my tech at Swagman that the distance between the center of the pinhole to the outside edge of the furthest wheel hoop...
Filter Your Search
Contact and Help