Will The Putco Chrome-Plated Push-Up Tie Down # # P99901 Fit My 1950 Chevrolet 3100 Stake Pockets?
Hi, Will the Putco 99901 Chrome-Plated Push-Up Tie Down fit a 1950 Chevy 3100 bed stake pocket? | The portion of the Putco Push-Up Tie-Downs # P99901 that goes into the pocket on your 1950 Chevrolet 3100 will be 1-3/8 of an inch by 1-3/8 of...
How Does a Curt Trailer Hitch Install on a 2012 Dodge Ram 4500 Cab and Chassis
When lookin at the image of the hitch it shows holes on the top but yet there are no holes on the bottom of the frame on my 2012 ram 4500 chasis cab....also the installation guide is not loading....I was wondering if u could confirm how the...
Backspacing of Dexstar Conventional Steel Wheel with +0.5" Offset - 16" x 6" Rim
What is the measure from the mounting surface to the inside edge of the rim? Backspacing? | The Dexstar Conventional Steel Wheel part # AM20766 is a 6" wide wheel which has a positive offset of .5" therefore, the backspacing is 4". |
Is Curt Trailer Wiring Harness C56236 Compatible with LED Trailer Taillights
1950 GMC FC 253 Pickup stop,tail,and turn 4 wire system attempting to add OPT-7 tailgate light bar the bar connects with 4 wire 3 wire and ground turn and brake one wire each side will the Curt 56236 run the light bar which is LED stop, turn...
Can Prodigy P2 Brake Controller Be Used on Tandem Axle Trailer
Will this work with a 3 axle trailer? In the description is says for 2 axles | The Prodigy P2 part # 90885 is actually good for up to 4 axles so it would easily handle your triple axle trailer. |
Troubleshooting Peterson Lexan 410-25 Running Tail Lamps Not Working
I have the Peterson lexan 410-25 tail lamps. The turn lamp works but the tail lamp does not. can you help ? | Trailer tail lights usually have 2 different circuits routed to them; stop/turn and then the running (tail) lights. Since your turn...
Filter Your Search
Contact and Help