How to Determine Towing Capacities of a Vehicle with and without Weight Distribution
I am buying a new 2015 gmc sierra 1500 with a towing capacity of 9200 pounds and a hitch tongue weight capacity of 500 pounds What is the maximum trailer weight that i can tow with existing hitch and with a new increased capacity hitch? Same...
Weight Distribution Recommendation for a 2012 GMC Sierra Towing a 2016 Shasta Oasis 18BH
Hi, I have a 2012 GMC Sierra and will be purchasing a 2016 Shasta Oasis 18 BH next week. Will I require both the weight distribution and sway or could I get away with just a sway bar install? GVWR is around 3800lbs for the trailer. No issues...
Is It Time To Replace The Trailer Brake Controller In My 2011 GMC Sierra 1500?
Truck 2011 GMC Sierra 1500, trailer is a 2019 Carry on Trailer. Dexter twin 3500 lb. axles. Pilot brake controller unknown model number. Both items purchased used. All lights work as they should. The problem is I have to have the controller...
Will Pro Series Weight Distribution System PS49582 Work for Trailer with Tongue Up to 600 lbs
I have a 2001 GMC Sierra 1500 that I will be using to tow a 39foot shell trailer used for carrying rowing shells. The empty trailer weighs in at about 2900 lbs. and the tongue weight is about 12. The max weight of the trailer, fully loaded would...
Correct Weight Distribution System for 2013 Sierra Extended Cab 4x4 Towing a 2012 Catalina 25RKS TT
Hi I have a bit of a dilemma. I want to choose correct WD System for Subject trailer vehicle combination. The trailer has an Empty Weight of 5360 Lb. and Empty Tongue weight of 630 Lb. Trailer GVWR is 7500. I want to purchase a Reese...
Will Pro Series Weight Distribution System PS49902 Work with Reese Pole Tongue Adapter RP3280
Will this work with Reese Distribution Kit 49582? | Yes, the Reese pole tongue adapter # RP3280 will work with the Pro Series weight distribution system, # PS49582, which is made by Reese. There are other pole tongue adapters that will not work...
Retracted and Extended Height of Pro Series 8k Square Swivel Trailer Jack
What is the dimension from the center of the swivwl to the base when retracted. | On Pro Series trailer jack # PS1400860383 it measures 17-1/8 inches from the center of the bracket to the bottom of the foot when retracted. It is 27-1/8 inches...
Swivel Trailer Jack with Enough Lift to get 20 Inches from the Ground to Bottom of Trailer Frame
Hi, I need a jack that extends to roughly 19-20, give or take an inch or two, measured from the ground to the bottom of the tongue frame. Its a 3x4 frame... so if the bracket hole is in the center of a 4inch tongue frame 2inch up from the tongue...
Where do the Pads that Come with the Pro Series Weight Dist Replacement Hardware # PS58339 Fit
Where does the 2 black pads bolt to? | The black pads that come with the Replacement Head Mounting Hardware # PS58339 fit on the side of the Weight Distribution (WD) head. Attached is a picture of the Reese Pro Series RB2 Weight Distribution...
Fifth Wheel Hitch Recommendation for a 2011 GMC Sierra with a 6 ft Bed
Will this hitch allow me to tow my fifth wheel rv using a 2011 GMC Sierra with a 6 foot bed. Thanks | You can use the Pro Series, part # PS30121, to tow a fifth wheel trailer with your 2011 GMC Sierra. This hitch fits into the industry standard...
Availability of Separate 5th Wheel Slider Assembly for ProSeries 20K Hitch
I have a Reese 20K Pro Hitch already installed. I was wondering about getting a slider by itsef to do a remount. Is the slider available without a hitch or rails? | Yes, we do offer a stand-alone slider assembly that will work with your Pro...
Weight Distribution and Sway Control Recommendation for a 9,990 Pound Trailer and 2001 GMC Sierra
I am looking for the correct hitch set up for a travel trailer that has a gross weight of 9990 and a tongue weight of 640lbs. I am pulling it with a 2001 GMC Sierra 2500 HD. I was looking at the PS49582. It seems to be rated correctly. I am...
Is Inner Leg of Pro Series Jack # PS1400850383 Replaceable
looking for a replacement leg for this jack. | I checked with Pro Series and they do not offer a replacement inner leg for the Pro Series Square Jack part # PS1400850383 that you referenced. If you are missing yours and now it's not functional...
Does the Pro Series 20k 5th Wheel Hitch Head Pivot Side to Side?
Does this 5th wheel pivot side to side? | The Pro Series 5th Wheel Trailer Hitch w/ Rails and Installation Kit # PS30132 does have a head that pivots side to side as well as front to back. You can see this in the attached video towards the...
Fifth Wheel Or Gooseneck Hitch Recommendation for 2004 GMC Sierra 2500HD
Looking at 5th wheels between 10-11.5k# and will be touring around US with our micropreemie once gets trache out this summer-now 4, prefer goosenk but u say go with 5th wheel for stabilty/ride,etc. Agreed and want safest situation-just dont...
Troubleshooting a Pilot 2-6 Brake Electronic Brake Controller for not Detecting Trailer
wired according to directions and correct wiring indicator light comes on. Plug in trailer and nothing, Does trailer need to be on hitch for ground? 2010 GMC 1500 P.U. Denali. | You may try attaching your vehicle to your hitch and see if that...
Recommendation on a Weight Distribution and Sway-Control System to Work with a 1999 GMC Sierra
I have a 99 GMC Sierra with the 5.3 and need to know if the 800# setup would be what I need. Thanks Ship Weight: 5,208 lbs. GVW: 7,600 lbs. Hitch Weight: 667 lbs. Length: 30 ft. 6 in. Width: 96 in. Height: 11 ft. 1 in. | When deciding on the...
Can a Ranch Hitch Offset 5th Wheel to Gooseneck Adapter be Used on a 2010 GMC 1500 Crew Cab
We have a 2010 GMC 1500 Crew Cab with the short bed/box. Will this work on our pickup ? | You can use the Ranch Hitch Fifth-Wheel-to-Gooseneck Coupler Adapter with 8 Inch Offset, # AM3139, to tow your fifth wheel trailer with your 2010 GMC 1500...
Weight Distribution Recommendation for 5000 lb Travel Trailer Towed by 2004 GMC Sierra
Hello. I believe what I have listed is what I need. I have 2004 GMC Sierra with the heavy duty towing package including factory 7-way wiring. I am going to be towing a 23 foot travel trailer with 405# TW and 4,950# GVW. Do most travel trailers...
What to Consider When Choosing a Replacement Trailer Jack for a Triton Boat Trailer
I have a 1998 Triton TR18 Bass Boat and Triton Trailer. The trailer jack is a Fulton weld on not sure what model number - held on by a snap ring. I am looking for suggestions on replacements as it is in bad shape. would this work? Pro Series...
Can Pro Series Trailer Jack - PS1401420303 be Mounted at the Back of a Trailer for Support
Is this jack only intended to stabilize the rear of the trailer when its unhooked from a vehicle or can it also be used to help minimize the rear sag of a trailer when loading equipment onto the trailer while its hooked up to a vehicle? My trailer...
What Angle Should the Head Be for Pro Series Weight Distribution System # PS49903
When using the rivet and space washers to alter the angle of the spring bar, I dont see any advice in videos or installation instructions on what the correct angle is. Can you advise? | The correct angle is going to depend on your specific...
Weight Distribution Recommendation for a Travel Trailer that has Tongue Weight of 485 lbs
I want to purchase Weight Distribution system PS49901. It has Tongue Weight capacity of 550 lbs. My travel trailer has TW= 485 Lbs, Unloaded Wt = 4335 Lbs. and GVWR = 7000 lbs. Please let me know if the wight distribution system PS49901 is...
What Size Hole is the Pro Series Jack PSEA20000103 Designed to Fit
I just tried installing the trailer jack on my trailer and the diameter of the hole on the trailer is just a little to small for the trailer jack I got. Can I make it a little bigger somehow or would that cause another problem? When I measured...
Filter Your Search
Contact and Help