Result:

Is it possible to engage break away while parked ? Considered for safety,theft prevention?Will it run battery out? | To activate a breakaway system such as # 20099 you would just pull the pin out of the switch. With the pin removed the metal...

What would you recommend to use to cut the following item? If I use a powered miter chop saw should i use a metal abrasive wheel type blade? RA-28 Rackem Fitz-All Enclosed Trailer Ladder Rack | The Rack Em Ladder rack part # RA-28 is made of...

In Michael H. description the numbers seem misprinted. I would like to know if the height can be adjusted, and what the dimensions are from the mount plate to the top of the Crossbar in the tallest adjustment. | The height can be adjusted on...

I have a 6x10 cargo trailer and I was wondering about the Rackem Fitz-All Enclosed Trailer Ladder Rack. Does the cross bar come long so I can cut it to the desired length or is it already cut for a 6 wide trailer? | The cross bars on the Rack...

My trailer is 750. Will this dolly work | Sorry, the Rack'Em # RA20 is only rated for trailers weighing up to 500 pounds. You could use the Trailer Valet # TVXL2 which has a capacity of 10,000 pounds. |

Can I buy just the top part the hook holding the etrack? That way I can add a longer vertical track to it. | The top part with the hook on the Spare Tire Rack for Enclosed Trailers, # RA-16, is not available as a separate part. A lot of customers...

I have a 2 inch receiver can i use this dolly that only has an inch and 7/8 ball. Thanks | Even though the Rack'Em Trailer Dolly, part # RA20, has a 1-7/8 inch ball it should work fine on your trailer. Since the trailer will be moving at a...