Hitch for 1952 Chevy 3100 Pickup Truck
MY 52 CHEVY PICKUP 3100 IS 46inch WIDE FRAME. DO YOU HAVE A HITCH TO FIT THAT? | The only hitch that would work for you is a weld-on such as the Curt # 15903. This is a universal hitch that is a Class V with a 2" receiver and works with frames...
Looking for Hitch Solution for 2004 Monaco Dynasty Coach
Morning Have a customer looking for a trailer hitch assembly for their 2004 Monaco Dynasty coach Diesel pusher The original hitch appears to have been cut off with a torch Any help on this would be greatly appreciated | Hey Bill, I wish...
Recommended Gooseneck Hitch for a 1953 Chevy 6400 Dually
Hello, I have a 1953 Chevy 6400 dually i.e., the 2 ton version - GVWR plate has 16,000 lbs.. Between the left and right frame at the rear axle I have 35.5 between the frame rails and it is flat - very, very similar to the 2024 Chevy 4500. I...
Will Dextar Conventional Steel Wheels Fit on a Vintage Truck
I know that these rims are for trailers, but will they work on a 1954 3100 Advance Design Pickup with a 6 on 5.5 bolt pattern? | The Dexstar 15" Conventional Steel Wheel, # AM20514, are basically the same wheels that were used on vintage 1940's...
1947-1953 Chevrolet Advance Design Pickup 3600 8 Lug Wheel
It is well known on many forums that you all have a Dexstar Black steel rims that is a perfect fit for 8 lug vintage pick ups. Any chance I could get a part number? | I believe the wheel that they are refering to is the Dexstar Conventional...
Solution for Trailer Hitch Receiver on 1952 Chevrolet 3100
Do you sell a bolt on Class III hitch for a 1952 Chevy 3100 truck advance design? | I do have a solution, but there are no custom-fit bolt-on hitches for your 1952 Chevy 3100. What you can use is a universal hitch like the # 41990-07. This...
Overall Length of Bristol Double RV Waste Valves # 34466ND14AAR
Hello Could you please provide me with the outside to outside over all length, hub to hub. Thank You | The Bristol Double RV Waste Valves # 34466ND14AAR is about 9" long outside to outside. Attached is a photo showing this as well as a review...
Baby Moon Cover for Dexstar Conventional Trailer Wheel AM20514
Do you sale babymoon or any other hub caps that fit your 15 6 lug conventional dexter wheels. | Yes we have the baby moon covers # AM981306 that fits the 15 inch conventional trailer wheels part # AM20514 that you referenced. |
Will the Dexstar Conventional Steel Wheel Part # AM20766 Work with a Tire Tube
Will the Dexstar # AM20766 accept a tube required with the various tube type wide white wall bias ply tires? | I spoke with my contact at Dexstar and they informed me that you should have no trouble using the Dexstar Conventional Steel Wheel...
Does Demco Hijacker Autoslide Fifth Wheel Hitch Require Grease Maintenance
Does the pin head need to be lobed anywhere like the mechanism where the pin slides in | I attached a picture that I took from the install instructions for the Demco Hijacker part # DM8550034 that you referenced that shows all of the components...
Recommended Trailer Hitch Receiver For A 1974 Ford Ranchero
Hi, Im interested in a tow hitch for a 1974 Ford Ranchero. Can you tell me if you make one and what the product number is? Many thanks, Lock | Unfortunately we do not have a trailer hitch confirmed to fit a 1974 Ford Ranchero so you would have...
Is There a Dexstar Conventional Steel Wheel 16" 8 Lug Without Offset
Is this rim available without the + .5 offset? : Dexstar Conventional Steel Wheel w/ +0.5 Offset - 16 x 6 Rim - 8 on 6-1/2 - Black Item # AM20766 | The Dexstar Conventional Steel Wheel 16" 8 Lug part # AM20766 is only offered with an offset,...
What is the Width of the Curt Trailer Hitch Receiver part # 13430 is There a Universal Available?
What is the width of this hitch? | I went out to the warehouse and got the measurements for you on the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" part # 13430 which has been made for the 1997-2006 Wranglers. To the inside of...
Recommended Best Trunk Mounted Bike Rack For 2012 Acura RDX
Hi can you suggest the best bike rack for a 2012 ACURA RDX? We will be carrying 2 girls bike and one boy bike. | For a 3 bike carrier confirmed to fit your 2012 Acura RDX, I recommend the Hollywood Racks Over-the-Top 3 Bike Rack for Vehicles...
Could Curt Multi Fit Hitch C13702 Fit Truck Frame
C13702, can this be used on a truck? | Yes, the Curt multi-fit hitch part # C13702 that you referenced could be used on a truck. |
Parts Needed to Install Prodigy P2 90885 Trailer Brake Controller in 1967 Ford Ranchero
Need to install brake control on 67 ford ranchero really like install kit with module in it can you please send me a total workup from scratch | To install a trailer brake controller like the Prodigy P2 # 90885 in your 1967 Ford Ranchero you...
Filter Your Search
Contact and Help