Trailer Turn Signals Not Working with # C55050 Wiring Harness Installed on a 2008 Jeep Commander
I have the 118408 converter connected to my 2008 jeep commander i everything works fine at the plug, when I plug in the only lights that work are the running lights, with running lights off, if I turn on a blinker and step on the brake the brake...
Troubleshooting Right Side Trailer Lights That Are Dim
I noticed that my right turn signal and rt tail light is dim on the trailer. I wanted to troubleshoot a bit further and hooked up a 4 way trailer light tester and the same dim light on the rt side. I unplugged the harness and re plugged everything...
Recommended Trailer Brake Controller For 2008 Jeep Commander
The 2008 Jeep Commander doesnt have the plug under the dash for a plug and play brake controller installation, so youll need to hard wire the brake controller. What brake controller do you recommend? I have a 7-Way trailer connector at the...
Trailer Running Lights Not Working with Wiring Harness 118422 on a 2008 Jeep Commander
I used the t-one wiring harness on my 2008 jeep commander and have no running lights on my boat trailor although when I switch my trailor to my sonoma truck they work fine, what is my problem? I have turn signal - brake lights but no running...
Finding the Stop Light Signal Wire to Install an Electric Brake Controller in a 2006 Jeep Commander
Im installing a brake controller. Im referencing your video on an installation on a 2010 jeep commander. I have a 2006 commander. In the video it has the brake switch as a white with light green, but I dont see that on my 2006. I see a white...
Troubleshooting Boat Trailer Turn and Brake Lights That Work Fine Until Running Lights are On
My trailer lights work fine until I turn on my headlights. -then the brake and signal lights dont. Any ideas? | What you're experiencing is a textbook gound issue. The ground connection isn't strong enough to handle the power draw from the...
No Right Turn Power on Pin 2 on a 10-Way Connector on a 2007 Jeep Commander
I have a 2007 Jeep Commander and all of the trailer lights worked until today. I checked with a test light in the 10 way connector and found no power to right turn signal. Where can I find the blown fuse? | Thanks for sending a diagram! The...
Troubleshooting Running Lights Not Working On Two Trailers Towed by a 2006 Jeep Commander
I have a 2006 Jeep Commander and have no running lights on either my utility trlr. or boat trlr. All of the wires are hot to the trlr. lights. Could this be a ground problem? | This could definitely be a ground problem. Without a proper ground,...
How To Test A 4-Way Wiring Harness On A 2006 Jeep Commander
2006 Jeep Commander I bought my Jeep a few years ago from a dealership and they installed a towing package with this Hopkins wiring package. I have fried the converter box multiple times. First trailer I hooked it up to I had no power so I...
Prodigy Brake Controller Installation Instructions for 2010 Jeep Commander Limited with Tow Package
I have a 2010 Jeep Commander with the Hemi engine and a Class 4 Tow Package 7 and 4 pin connector. Will the prodigy work for me? Is it compatable? Where would I find my wirning harness? | Brake controllers are not vehicle specific, so you will...
Filter Your Search
Contact and Help