Dexter E-Z Flex Rubber Suspension System # K71-653-00 Fitment on 2005 Outback 28RSDS Trailer
Hi, I own a 2005 Outback 28RSDS which has, I believe, AlKO axles. Id like to replace the shackle plates and bolts and equalizer with this Dexter kit. Will it work properly with this system? If so, I assume the nylon bushings in the spring...
Recommended Wiring Harness for Hopkins Agility Brake Controller in 2008 Chrysler Aspen
What wire connector do i need to connect hopkins 47294 to my 2008 chrysler aspen... modular on both ends please | The Hopkins Agility Trailer Brake Controller # HM47294 will use the wiring adapter # HM47755 if you have the factory 7-way trailer...
Does the Kenda Tire and Wheel # AM30780 Come Inflated to the Proper PSI
Do these tires and wheels come ready to install on my trailer? Are they already filled to the proper psi? | The Kenda Tires and Wheels # AM30780 will have some air in it, but you will need to check the air pressure once you mount the tire and...
Do Roof Top Cargo Bags Affect Gas Mileage
I have a 2009 Chrylser Aspen, and at the end of the month will be driving from NY to South Carolina.....I will be traveling with my wife / two children and mother in law, so space is extremely limited. I am looking for a cargo bag that I can...
How to Install a 7-Way on a 2007 Chrysler Aspen
I bought a hitch for 2007 Chrysler Aspen along with a Pollak 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End part HM40975 and realized it didnt have factory OEM plug in. I was thinking of ordering the T-One Vehicle...
Mounting Tab Width Range for Blue Ox Acclaim Tow Bar # BX4330
Your info states base plate needs to be at least 23inch spread apart. What is the furthest distance that this bar can be spread apart? | The Blue Ox Acclaim Tow Bar # BX4330 that you referenced can be used with base plate kits that are between...
7-Way Adapter Wire Connection Pin Locations on 2009 Chrysler Aspen
I have a 2009 Chrysler Aspen that has both the straight 4 pin trailer connector and the 7 pin connector with the blade connections. The person I bought it from wired it to the 4 pin connector which worked fine but I went ahead and changed it...
Small Wheeled Jack for my Enclosed Trailer
I have a single access, enclosed, 3000 lb trailer. I currently have a top down jack fixed. I want to add a wheeled jack that can pivot...so I can move the trailer a hair here or there when hitching. I want a single wheel, not dual. Is a...
Engine Block Heater Recommendation for a 2008 Chrysler Aspen with Hemi
Will this block heater fit a 2007 Chrysler Aspen V8 Hemi? | The only style of engine heater I can recommend for your 2008 Chrysler Aspen with a Hemi is a magnetic pad like the part # KH24100. There are no cartridge style heaters available. |
Installation, Drilling and Trimming Required to Install a Trailer Hitch on a 2008 Chrysler Aspen
Do the holes need to be drilled from the underneath toward the bumper ? Do the holes need to be drill from the underneath side toward the plastic shroud ? Does the plastic have to be trimmed ? | What our installers do when installing hitches...
Replacement Trailer Wiring Harness Recommendation for 2008 Chrysler Aspen
I have this installed on a 2008 Chrysler Aspen. It has been installed for over a year with no issues. Recently the lights were very dim on the trailer. Also the left taillamp on the vehicle would stay on even with the vehicle off and trailer...
Will Roadmaster Rear Anti-Sway Bar # RM-1129-126 Fit a 2007 Chrysler Aspen
Will this bar also fit my Chrysler Aspen, which is basically the same as the Durango? | I spoke with my contact at Roadmaster and he said that the Roadmaster Rear Anti-Sway Bar, part # RM-1129-126, that fits the 2007 Dodge Durango will also...
Recommended Transmission Cooler for a 2007 Chrysler Aspen 5.7 Liter Hemi V-8
2007 Chrysler aspen 5.7 can you tell me if part #D13102 is the best cooler for my vehicle? Total weight vehicle and towed travel trailer is app 13000lbs. Thanks | The transmission cooler # D13102 you referenced is recommended for compact...
Fit of Hitch Covers and Ball Covers on 2-Inch Hitch on 2007 Chrysler Aspen
we have a 1inch and seven-eights ball. will a 2 inch hitch cover fit | If you want a cover for your actual hitch ball itself you can use # 42250 or one of the others shown on the included link. In the case of your 2007 Chrysler Aspen the only...
Measuring for a Ball Mount with the Right Rise or Drop for a 2008 Chrysler Aspen
Hi, I have a 2008 Chrysler Aspen and will need a hitch to haul my trailer. If I measure the hitch height with the truck empty, the calculations tell me I will need a 4 inch drop. However if my if I have my filled coolers and camping gear in...
Can 4,000 lb Floor Jack with Stands # PTW1605 Be Used When Storing Trailer for Jack Stands
To preserve the tires am I correct that I will need 4 stands during long term storage? | The trailer jack would hold the front of the trailer and then the two stands of the 4,000 lb Floor Jack with Stands # PTW1605 would hold the other end of...
Wiring Options for a 2009 Chrysler Aspen Towing a Boat Trailer with a 5-Way Flat Trailer Connection
Im looking to wire my 09 Chrysler Aspen and am thinking I need 118390 T-One vehicle Harness. My boat trailer has a 5 flat connection and Im not sure how to handle setting up connection. I dont see a 5 flat T-One harness so Im guessing I need...
How to Add Reverse Light Circuit to Trailer and Two Tow Vehicles
Hello: I have my tow vehicle wired with a 4 flat and 7 way. I have a trailer that uses a 4 flat that I would like to add reverse lights to but, I still want to have the 4 flat pin connection as another vehicle that may also tow the trailer...
Rhino Rack Roof Rack Recommendation for a 2007 Chrysler Aspen
I have a 2007 chrysler aspen will these rails fit on my vehicle?It measures 42.5inch center to center and do I need any added parts? | Yes, I checked with Rhino Rack and the roof rack by them that consists of the Rhino-Rack Vortex Aero Crossbars...
Forest River LED Trailer Light Replacements
I have a 2004 make: forest river model: haulin trailer and I want to replace all exterior and interior lights with LED. I also want to replace the vent as it is cracking. Id like to diamond the fenders as well. Brake lights: I measured them...
Size of Air Lines of Air Lift Load Controller Compressor System AL25856
What size are the push to connect air lines? | The air lines of the Air Lift Load Controller Compressor System for Air Helper Springs # AL25856 are 1/4 inch. It is highly recommended you use the Air Lift Air Hose Cutter # AL10530 for the air...
Recommended Yakima Ski and Snowboard Rack With T-Slot Channel Mounts
does someone make and sell a yakima ski rack mount for a after market 4 1/2 inch crossbar or a t mount for the yakima ski rack ? this is the cross bar that I have. Brand: Aftermarket Branded Surface Finish: Aluminum Manufacturer Part Number: CB-SPTU-N-210...
Locating Reverse Circuit for a Peak Wireless Backup Camera on a 2007 Chrysler Aspen
which wire is the hotwire for the backup light on a 2007 chrysler aspen | The only way to be sure which wire is the reverse light circuit is to test the wires with a circuit tester like part # 3808. Pull the tail light of, and have someone...
Wiring Differences Between a 2008 and 2007 Chrysler Aspen for T-One Harness Part # 118390
Video on website utilizes a 2008 Chrysler Aspen in demonstration. My question is are there any differences in install on 2007 Aspen? | There should not be any difference in the wiring process between a 2007 and 2008 Chrysler Aspen. They use...
Filter Your Search
Contact and Help