!Wildcat Maxx Travel Trailer  x   >   !400E  x   >   Blazer  x   >  

How long is the wiring and does it have leads for the 4 accessyit can power? | I went ahead and spoke with Hopkins about the Blazer Off-Road Lighting Remote Control Kit # BL43VR and they informed me that the wire leads are 24" long and they...

C7493RTM OUR TRUCK IS 24VOLTS THE LIGHTS ON IT IS V426 WILL THIS LIGHT WORK AND ITS WIRING. WHAT IS THE RANGE VOLTAGE OF THE BULB. | We do have some 24 Volt lights, but the Blazer Trailer Tail Light - 6 Function - LED - Submersible # C7493RTM...

Is the constant 12v black wire used to power interior lighting thanks | Yes, the 12 volt accessory circuit of trailer wiring is normally what powers the interior lights of a trailer like the part # 398SB. |

I am a rural mail carrier and need to put some amber strobe lights on my jeep. Can these light be placed 2 in the back and 2 in the front one on each corner of the bumpers of a Jeep Wrangler? The wiring didnt seem very long in the video to know...

I have a 1978Ruffian travel trailer that I would like to upgrade to the LED lighting Can I use your product | The Optronics # RVIL21 is an incandescent lamp, NOT an LED. A comparable LED utility ceiling lamp with on/off switch would be part...

does the tape damage the roof over time? my trucks in my fleet are rentals. looking for a way to secure the magnetic light fixture to roof and not damage the roof of our F-150 vehicles. | The Buyers Products Magnetic Mounting Plate - Self-Adhesive...

So another question. Do I have to use the 40amp relay that come with the blazer wire kit to hook up my new water dragon 2700 lumens green light. Cant I just come off the extra battery to the fuse to the switch and back to to light.what does...

All the lights but the parking lights are working. I have flashers, right and left blinkers, brake and backup lights, but no parking lights. | Try connecting a known working 12 volt power source to the brown wires of the Blazer LED Trailer Tail...

Are these easy to remove when not needed? I have a leased truck with aluminum, but it will have to go back at the end of the lease. | Since your truck body is aluminum in order to install the Magnetic Blazer Amber lights part # C4850AW you need...

Question.. I replaced a broken Blazer LED tail light on my trailer with a new one and when the light are on there are only 2 LEDs on? The turn signal work with all LEDs blink? Is this normal? | Thank you for the details. I reached out to...

wil this light and switch work on a center console 21 ft boat used in gulf ? | The Blazer Complete Relay Wiring Kit with Toggle Switch # MM510 is a universal type applicate, so if you wanted to you can use it on the center console of your boat. I...

Hello - I have a 2009 Porsche Cayenne w/towing package that I would like to tow with. From my prior tow vehicle I also have a Tekonsha Prodigy P2. I understand the Cayenne needs a wiring adapter to fit the factory plug. Do you sell these...

I have an Ultra Tow Folding Aluminum 4 x 8 trailer, Item #49803. Has 4.80 12 Tubeless tires on 4 bolt demountable wheels. Load capacity 1170 pounds. The speed rating is 55mph and I want to modify so it will travel highway speeds of 70mph....

Do you have the heavy magnetic warning lights in red? I only saw amber ????? | We have the heavy duty warning lights in amber as you stated, like # C43A or # C4500AW. For emergency red lights, I recommend the Red LED Safety Light with Heavy...

Hello my question is on my light bar worked fine for 2 months now my drivers side turn signal the yellow lights are staying on the the red the signal works and the passenger side works fine its not hard wired only have going for...

I have a Prodigy #0000538575, connected to my 2006 Dodge Ram, 2500, 4WD, Diesel. When I turn off the ignition, the Prodigy lights do not turn off. It was sitting for awhile and ran my batteries down. What can I do? Thanks The first picture...

if you cut off the cigaret lighter to hardwire it how do you get the different flash patterns | That's not something I'd really recommend honestly. You'd have to take apart the end of the power port so that you could get the wiring after the...

I have a 2019 F250 SD and its a aluminum cab and body. I will need suction cups for it, do you have adapters from magnet to suction cups available? | I have a perfect solution for you! In order to attach the magnetic Blazer Amber Warning Light...

Does this light serve as a side marker rear light as well? | The GloLight LED Combination Trailer Tail Light - 5 Function - Submersible - 39 Diodes - Driver Side # STL161RLB you were looking at does not have a built in side marker light, so...

Are the magnets guaranteed to be strong enough to hold at highway speeds and rough roads? | The Blazer LED Amber Warning Beacon # C43A with magnetic mount does not carry a formal driving speed rating but I did go to our warehouse so I could...

will this product work on a 30 amp RV. how many light cubes can you hook up and do they all draw the same amount of amps. how long is the suppiled wiring on each cube. | Yes, the Blazer LED Cube Light Kit # BL28VR can be used on your 30 amp...

How many LEDs are in this light and what is the current drain amps? Than you | The Blazer RV Interior Dome Light with On/Off Switch # 398SB has 6 LEDs in the light. It has a small power draw of 0.15 amps at 12 volts. |

How do toy replace the light? I cannot get the clear Plastic cover off | You'll need a small slot screwdriver to slide into the slot you see the arrow in the picture I attached pointing out to gently pry off the lens. |

Will this Custer multi function strobe relay handle 10 amp or do I need to switch a relay? It says 420 milliamps. | The Custer Multi-Function Strobe Driver # STR-MRLY that you referenced is designed for LED light assemblies that don't draw nearly...