!Magnum x > !Quick Fist x > !Stackers x > Sea Breeze Motorhome x >

Ducted AC Unit Recommendation for 1996 National Seabreeze

I need to replace the air conditioner on our 1996 National Seabreeze. It is a single, ducted unit and operated by thermostat that also operates our heater. Can you suggest a replacement? Thanks - | I spoke with my contact at Atwood about...

Creating a 6-Way Round to 5-Way Flat Trailer Wiring Adapter

2005 National Seabreeze LX with a 6 pole wire connector by the hitch. My new boat has a flat 5 connector is there an adapter for 6 to 5? | We do not carry a 6-way to 5-way adapter, so I recommend making one using the Hopkins Trailer Connector...

Availability of Under Cabinet RV Interior Light

Looking for under cabinet 18inch light for 2007 national sea breeze. Tks | For an under cabinet light we have the Bargman Double Interior Light with Dual Switches # 30-76-243 that works well in the application you mentioned. It's only 11 inches...

Replacement AC Unit for 1994 National RV Motorhome with Dual AC Units

I have a 94 national 34 with dual roof airs. Both work but not very well and are most likely 27 years old. I can only operate one at a time. Generator is a 5500 watt. And I have a ducted roof. Will this unit be what I need to cool my RV? Or...

Fan-Tastic Vent with Fan Compatibility with 1995 National RV Motorhome

Would this fan fit my application? Thx 95 National RV | The Fan-Tastic Vent Roof Vent w/ 12V Fan - Clamp On - Manual Lift - 14-1/4" x 14-1/4" # FV801208 is the industry standard size that will work well with your 1995 National RV motorhome...

How to Pick Out Replacement Roof Vent Lid for 2005 National Sea Breeze

Do you know where I can find a replacement rooftop skylite cover for my shower? 2005 National sea breeze | Most likely we have what you are looking for but you will need to first determine what vent you have on your trailer. The best way to...

ShockStrap Recommendation for Tie Down to Be Used with Wider Handlebars

I purchased two pair of 3113DAT tie downs. I questioned etrailer support if the hooks would fit a 1inch handle bar of a bicycle, I believe the answer was 7/8. My bars are 7/8 and hooks fit fine but the springs clips will not close, theyre...

<< Back to Results

Filter Your Search