!Magnum  x   >   !Minnie Plus Fifth Wheel  x   >   !1956  x   >   Convert-A-Ball  x   >  

I see that this will not work with the lever style ball that works with ram factory prep bed, will this work with the bandw ball for ram underbed factory setup | The Convert a Ball fifth wheel to gooseneck adapter part # CAB-C5G can be used...

I have a F250 with a Curt gooseneck with the release on the ball. What do you have that will convert that to a 5th wheel? | The best solution is going to be using a simple gooseneck to 5th wheel adapter for your 5th wheel trailer; I recommend...

I have a 2 inch ball on a 2 x 2 reciever that I bought as a package. Am I able to take the 2 inch ball off of that reciever and replace it with a 1 7/8 inch ball or do I need to buy a different reciever? Thanks | To replace the hitch ball you...

Considering that this ball doesn’t have the locking mechanism on the top of the ball like the Curt and Reese options will this ball work with the Convert-a-Ball adapter? Most balls are flat on top but this BandW is rounded and I was wondering...

why is this item not recommended for ford factory tow package? | The Convert-A-Ball Cushioned 5th-Wheel-to-Gooseneck Adapter w/ Offset # CAB-C5GX1216, along with the standard adapter # CAB-C5G, are not recommended for the Ford factory tow package...

I have a 2019 F-250 with the factory installed towing prep. I know that it’s been mentioned that you can’t use this adapter with the factory ball that has the plastic clip but what if it’s used with the Curt gooseneck ball that comes in kit...

We have a 2002 Chevy Silverado 2500 HD pick up. There is a standard flatbed in place of the standard bed. We are being told that our new RV may not work with our set up do to the square ends of the flatbed possibly hitting the RV. Can you give...

I currently have a Trail air pin box Lippert 1116. This was coupled to my Reese 20k hitch. I recently purchased a new truck with a flat bed and a gooseneck ball. How can I tow my fifth wheel trailer with the cheapist way ? | The Convert-A-Ball...

Hello, how safe are these type of replaceable balls, is the one with the side pin better than the push button style, also, do you offer one that doesnt rust after it has been used? Can either of the ball styles be left installed all the time...

Im planning to buy this harness for my 2016 pilot EX-L CURT 56192 Wiring T-Connector Is this kit all I need to wire the trailer? I dont see the relays Not need it? Using with this hitch CURT 13146 Class-3 Trailer Hitch | I have a solution...

I have a 2016 Kia Sportage. I need an entire tow package, hitch, controller, and wiring for a 7 pole connector. I only see 4 pole flat connectors with the harnesses. | Beginning with the hitch, I'd recommend the Curt Class III, part # C13120....

Hello, I read a note quoted below Note: Use of any ball mount with a 10inch reduces the trailer hitch capacity by 1/3. Your towing capacity is limited to 2/3 of your lowest rated towing component - be it the vehicle, hitch, ball mount, hitch...

Would you use the cushioned convert-a ball mount together with the Curt RockerBall Shock Absorbing 2inch Hitch Ball or is this pointless? | You could certainly use the Convert-A-Ball Ball Mount for 2" Hitches # AMSC4 together with the Curt RockerBall...

I have been looking at the specs for these two adapters. Here is my situation I have a 1 ton truck with a Hillsboro aluminum flat bed, it has a trap door with a gooseneck ball below. I do NOT have a 5th wheel trailer, but various friends and...

Why cant this be used with the factory installed gooseneck equipment? | The Convert-a-Ball Adapter # CAB-C5GX1216 that you referenced can't be used with gooseneck balls that have the plastic latch mechanisms on the top of the balls like what...

Hi I have a 2015 carbon 387 that has a lippert lipp1116 18k 5th wheel pin box , my question is there a goosebox that has a gvw of 18k or greater . Thanks . | We have some options for you, but the only Goose Box that fits your Lippert 1116 pin...

My dodge ram has 35 inch tires and I believe a 4 inch lift with a flatbed aluminum aftermarket bed! I need to put a super glide hitch on it because it’s a Short bed! People are telling me that I cannot use my truck to pull my fifth wheel toy...

I currently have a RAM 2500 Limited 4x4, 6’4” Box and purchased the Companion RVK3600 for use with my Grand Design 295RL 5th Wheel. I am wondering if the Viking Solutions Portable Loading System Item # 310-VLV001 would help me in the meantime...

I have a 2006 Toyota Highlander for which I purchased a Curt Trailer Hitch as per the number #13530. I have also purchased a Hallmark Enclosed trailer PPT6X12DS2 Utility which is a 6x6x12foot long trailer. I need a 2inch ball and hitch to...

Bulldog BX1 Gooseneck Coupler Recommendation to Replace a Bulldog Hammerblow Coupler Question: I have a Featherlite 2 horse straight load trailer with a Bulldog Hammerblow 20,000 coupler. I am looking to replace the Hammerblow with a BX1 coupler....

My cousin has a Convert-a-ball w/offset king pin adapter from etrailer on his trailer. He told me that the four mounting bolts holding the top plate to the king pin box was an option to install until you get the trailer home. Is it safe to travel...

I just purchased a 2013 RAM 2500 4X4, was driving an 08 Ram 1500. I pull a steel 2 horse slant trailer and 2 jet skis. I know I will need new ball mounts for each. Im not sold on the adjustable, too afraid!!! What might you suggest for...

I am planning to pick up boat that is about 4 hours away and I am not very experienced in towing a boat. The tow vehicle is a 2013 Pathfinder with a hitch already installed. So, I need to buy the connecting pieces between the hitch and trailer....

Hello I have purchased a adapter, used from a friend and he is now located in Texas I am in Oregon would like more info on installation as you referred to a wrench for install ? | The folks at Convert-A-Ball recommend a very large crescent wrench...