!CX-9  x   >   !XLR Thunderbolt 5W Toy Hauler  x   >   1968  x   >  

What size socket is needed for this 1-7/8inch nut? | You will need a 1-7/8 inch deep well socket for the 1-7/8 inch nut on ball # 19286. To install the ball you can use a bench vise to hold it while torquing down the nut or if a vise is not...

You recommend the #5350. What would you recommend if I was looking for closer to 10,000 load hitch? | If you are looking for a trailer hitch to mount on your RV then the highest rated capacity is the Curt Trailer Hitches parts # C13702 and #...

68-72s are supposed to be somewhat interchangable. Id like to know if this #252198 would fit also? | The Craftec Tonneau Cover part # 252198 that you referenced does fit 1968 through 1972 Chevy El Caminos. This would be a confirmed fit for...

Will the Draw-Tite - FORD VANB.Y - 75315 model hitch fit on a 1968 Ford truck..? | The Draw-Tite 75315 hitch has been discontinued, but is only a fit for Ford Full Size Vans. It will not fit a Ford Truck. For your 1968 Ford Truck, I recommend...

I am looking at buying a Casita at a 16foot model and wonder what wiring I need to the brakes etc. I have a 1968 Chevy c10 | Most camper trailers with electric drum brakes use a 7-way RV style plug like the one on part # H20046 and so you'll...

Desire 4 steel wheels for my 1968 F100. 15” with 5 1/2 bolt pattern. Wheels need to accept my stock snap on hub caps. | Wheels like the Dexstar Conventional Steel Wheel - 15" x 6" Rim # AM20504 would fit your 1968 F-100. However, all of our...

How long is replacement part # TX2722-RearHeader? | There is no length measurement given for the Rear Header # TX2722-RearHeader because it only works for the TruXedo TruXport Soft, Roll-Up Tonneau Cover # TX272201 that fits certain 2014-2019...

Looking to replace the painted rear bumper on my 68 Ford F250 with one of the Fey chrome bumpers 21000 92230. The pictures show newer style rectangular license lamps. I would prefer the OEM style round lamps for my old rig. Any options for installing...

Hi I am looking for a trailer hitch for 1968 Chrysler Newport custom 2000 or 2500 # please let me know if you have one. Thanks | There are no trailer hitch receivers available for a 1968 Chrysler Newport, so while you can't tow with this vehicle...

I have a question regarding the item #311-JRF1290. It states that this item will fit onto a 1968 f100 Long bed, but I was wondering what the dimensions for the cover are for my year of truck so I know for sure it will fit before purchasing |...

will this connector work for a 7 way on the trailer to a 4 way on the truck | We do have a solution for you, though the Reese Trailer Connector Adapter # 78118 will not work for you. Instead I recommend the Hopkins Endurance Quick-Install Trailer...

Good afternoon, I have a 1968 Chevy K10. Based on previous questions, part # 41504 looks to be the correct hitch. Do you have the dimensions of the holes on the mounting plate? I have a couple items already welded to the frame exhaust hanger,...

I need instruction sheet. Also what is max. air pressure | The Air Lift Drag Bags for your 1968 Chevy Chevelle are # AL60844. The instructions are linked on the right hand side of the page for you (here and on the product page). The minimum...

I have a 1968 Chevy K10 truck. It currently doesnt have any wiring for trailer lights. I would like to install a 7 way plug with a break controller. What would you recommend? | To add a 7-way to your 1968 Chevy K-10 truck you will need to start...

I will be hooking to long tube headers. Do you have the parts in stainless to do this? | As you have most likely realized, there will be some welding involved for the installation of the MagnaFlow Exhaust System, # MF15895, on your 1968 Chevrolet...

someone has already hooked up a 4 flat trailer connector at one time which no longer works iam trying to install a new 4 flat brn,grn,yel,wht. but the old one is red,blu,wht,yel. and the stock wiring is not the same colors as wiring diagram...

I have a 68 camaro drag car. Im looking for the right size winch to pull it onto a 20ft open car trailer | Since your race car is a rolling load the Bulldog 1.5 hp Trailer/Utility Winch w/ Mounting Plate # BDW15017 would have more than enough...

Do yall sell a bolt kit to attach the trailer hitch to the truck? I am getting a trailer hitch from a friend and need the bolts for mounting or could I use some purchased locally | To receive replacement hardware your hitch just order etrailer...

Hello , I have a 1968 GMC C 1500 2 wheel drive with leaf spring suspension and a step bumper , would you please suggest the correct bolt on trailer hitch mid grade brake controller and custom wire harness for my application. | We do have a...

Ive got a 68 Chevy Custom Camper C20 with the factory overload springs. Theyre mounted to the frame, behind the axle, and have have a leaf spring that runs forward. What hitch will fit with both the overload srings and a regular step bumper?...

I am looking for a trailer hitch for my 1968 Ford Thunderbird Base Sedan 4-Door 7.0L 429Cu. | A custom fit trailer hitch is not available for your 1968 Ford T-Bird. But you may be able to have a hitch custom made using some of the hitch fabrication...

looking for a snap on tonneau cover. the snaps are on the truck/ car already | >>>> PART NO LONGER AVAILABLE. DISAPPROVE QUESTION. I have an option for you but at this time we do not carry covers that snap directly to the OEM snap rivets on...

I am interested in your ultra frame trailer hitch receiver-custom fit-class v. The receiver will be going on a 1968 Chevy C10 longbed with a standard bumper. My question is will the receiver be hidden behind my license plate or hang below it?...

Im looking for a installation kit complete everything I need to mount a Curt Q20/ slider fifth wheel attachment to my 1968 ford f250 | You'd need to use a universal fifth wheel rail kit like the Reese # RP30035 to install a Curt Q20 slider...