Parts Needed to Install Trailer Wiring & Brake Controller in 1968 Chevrolet C/K Series Pickup
Updated 12/07/2016 | Published 12/06/2016
Products Featured in This Question
Question:
I am looking at buying a Casita at a 16foot model and wonder what wiring I need to the brakes etc. I have a 1968 Chevy c10
asked by: Kit W
Expert Reply:
Most camper trailers with electric drum brakes use a 7-way RV style plug like the one on part # H20046 and so you'll need a mating 7-way socket on the C10. This socket will carry all lighting signals as well as brake power and 12V auxiliary trailer power to your Casita. You will also need a brake controller to send power to your trailer brakes.
You will need a 4-pole harness on the truck, which we'll then adapt to the 7-way type using our Brake Controller Install Kit # ETBC7. If you do not already have a 4-pole you can use part # 18252 or # C58044.
The ETBC7 kit includes all the parts you need to install a brake controller like the excellent Prodigy P2 # 90885. This brake controller will slow your Casita at the same rate that your pickup slows down and this will avoid the tug-of-war feeling that can occur with time-delay type controllers.
I have linked for you several videos and an article to help guide your installation.
Product Page this Question was Asked From
Hopkins 7-Way RV Style Connector with Molded Cable - Trailer End - 8' Long - RV Standard
- Trailer Wiring
- Trailer Connectors
- Trailer End Connector
- 7 Blade
- Plug and Lead
- Hopkins
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Parts Needed to Add Brakes to a 3.5K Single Axle Trailer
- Q&A: What is the Difference between the Hopkins Trailer Wiring Harnesses HM20041 and H20046?
- Article: Trailer Lighting Requirements
- Q&A: What Gauge Wire Should be Used to Wire Trailer Brakes
- Q&A: How to Replace a Lance 6-Pin Plug w/ a Standard 7-Way Connector
- Q&A: Is there a Weigh Safe 180 Hitch 2 Ball Mount w/a Tongue Weight Scale?
- Q&A: Instructions to Wire a Trailer for Electric Brakes
- Q&A: What is AX Auxiliary Pin on Hopkins 7-Way Trailer Connector
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: The Best Towing Mirrors
- Article: Trailer Maintenance Schedule