2014 Jayco Baja Camper RV Brakes

Features:

The automotive-grade pads on these brakes offer lasting effectiveness. Both 10" x 2-1/4" assemblies have rust-resistant, e-coated backing plates. Fits 14" to 15" wheels.

Features:

The automotive-grade pads on these brakes offer lasting effectiveness. Both 10" x 2-1/4" assemblies have rust-resistant, e-coated backing plates. Fits 14" to 15" wheels.

Features:

Want brake adjustments that go like clockwork? These brakes automatically adjust as you tow so you don't have to crawl around on the ground to do it manually. 10" x 2-1/4" Assemblies fit 14" to 15" wheels. Made in the USA.

Features:

Want brake adjustments that go like clockwork? These brakes automatically adjust as you tow so you don't have to crawl around on the ground to do it manually. 10" x 2-1/4" Assemblies fit 14" to 15" wheels. Made in the USA.

Features:

Whether you're replacing trailer brakes or installing some on a new brake axle, these are easy to work with from start to stop. 10" x 2-1/4" Assemblies fit 14" to 15" wheels. 4-Bolt pattern backing plate. Made in the USA.

Features:

Whether you're replacing trailer brakes or installing some on a new brake axle, these are easy to work with from start to stop. 10" x 2-1/4" Assemblies fit 14" to 15" wheels. 4-Bolt pattern backing plate. Made in the USA.

Features:

If your trailer sees off-road action, use a handbrake (not included) with these brakes to hold it steady when parking on uneven terrain. 10" x 2-1/4" Assemblies fit 14" to 15" wheels. Made in the USA.

Features:

If your trailer sees off-road action, use a handbrake (not included) with these brakes to hold it steady when parking on uneven terrain. 10" x 2-1/4" Assemblies fit 14" to 15" wheels. Made in the USA.

Features:

Whether you're replacing your trailer brakes or installing some on a new brake axle, these are easy to work with from start to stop. 10" x 1-1/2" Assemblies fit 13" to 15" wheels. 4-Bolt pattern backing plate. Made in the USA.

Features:

Whether you're replacing your trailer brakes or installing some on a new brake axle, these are easy to work with from start to stop. 10" x 1-1/2" Assemblies fit 13" to 15" wheels. 4-Bolt pattern backing plate. Made in the USA.

Features:

The automotive-grade pads on these automatically adjusting brakes offer lasting effectiveness. 10" x 2-1/4" Assemblies have rust-resistant, e-coated backing plates. Fits 13", 14" and 15" wheels.

Features:

The automotive-grade pads on these automatically adjusting brakes offer lasting effectiveness. 10" x 2-1/4" Assemblies have rust-resistant, e-coated backing plates. Fits 13", 14" and 15" wheels.