2012 CrossRoads Slingshot Travel Trailer RV Brakes

Features:

The automotive-grade pads on these brakes offer lasting effectivenes. 12" x 2" Assemblies have rust-resistant, e-coated backing plates. Fits 14-1/2" to 16-1/2" wheels.

Features:

The automotive-grade pads on these brakes offer lasting effectiveness. Both 10" x 2-1/4" assemblies have rust-resistant, e-coated backing plates. Fits 14" to 15" wheels.

Features:

The automotive-grade pads on these brakes offer lasting effectiveness. Both 10" x 2-1/4" assemblies have rust-resistant, e-coated backing plates. Fits 14" to 15" wheels.

Features:

Driver's-side and passenger's-side electric brakes measure 12" x 2". Brake pads are made of durable friction material for improved braking and longevity. E-coated backing plates resist rust. Fit 14-1/2" to 16-1/2" wheels.

Features:

Corrosion-resistant Dacromet electric drum brakes have automotive-grade brake pads. 12" x 2" Assemblies have automotive-grade brake pads. Fits 14-1/2" to 16-1/2" wheels.

Features:

Whether you're replacing trailer brakes or installing some on a new brake axle, these are easy to work with from start to stop. 10" x 2-1/4" Assemblies fit 14" to 15" wheels. 4-Bolt pattern backing plate. Made in the USA.

Features:

Whether you're replacing trailer brakes or installing some on a new brake axle, these are easy to work with from start to stop. 10" x 2-1/4" Assemblies fit 14" to 15" wheels. 4-Bolt pattern backing plate. Made in the USA.

Features:

Whether you're replacing trailer brakes or installing some on a new brake axle, these are easy to work with from start to stop. 10" x 2-1/4" Assemblies fit 14" to 15" wheels. 4-Bolt pattern backing plate. Made in the USA.

Features:

Whether you're replacing trailer brakes or installing some on a new brake axle, these are easy to work with from start to stop. 10" x 2-1/4" Assemblies fit 14" to 15" wheels. 4-Bolt pattern backing plate. Made in the USA.

Features:

Whether you're replacing trailer brakes or installing some on a new brake axle, these are easy to work with from start to stop. 10" x 2-1/4" Assemblies fit 14" to 15" wheels. 4-Bolt pattern backing plate. Made in the USA.

Features:

Whether you're replacing trailer brakes or installing some on a new brake axle, these are easy to work with from start to stop. 10" x 2-1/4" Assemblies fit 14" to 15" wheels. 4-Bolt pattern backing plate. Made in the USA.

Features:

If your trailer sees off-road action, use a handbrake (not included) with these brakes to hold it steady when parking on uneven terrain. 10" x 2-1/4" Assemblies fit 14" to 15" wheels. Made in the USA.

Features:

If your trailer sees off-road action, use a handbrake (not included) with these brakes to hold it steady when parking on uneven terrain. 10" x 2-1/4" Assemblies fit 14" to 15" wheels. Made in the USA.

Features:

Whether you're replacing your trailer brakes or installing some on a new brake axle, these are easy to work with from start to stop. 10" x 1-1/2" Assemblies fit 13" to 15" wheels. 4-Bolt pattern backing plate. Made in the USA.

Features:

Whether you're replacing your trailer brakes or installing some on a new brake axle, these are easy to work with from start to stop. 10" x 1-1/2" Assemblies fit 13" to 15" wheels. 4-Bolt pattern backing plate. Made in the USA.

Features:

Driver's-side and passenger's-side electric brakes measure 12" x 2". Brake pads are made of durable friction material for improved braking and longevity. E-coated backing plates resist rust. Fit 14-1/2" to 16-1/2" wheels.

Features:

Driver's-side and passenger's-side electric brakes are 12" x 2". Durable friction material provides improved braking and longevity. Dacromet-coated backing plates are corrosion resistant. Fit 14-1/2" to 16-1/2" wheels.

Features:

Driver's-side and passenger's-side electric brakes are 12" x 2". Durable friction material provides improved braking and longevity. Dacromet-coated backing plates are corrosion resistant. Fit 14-1/2" to 16-1/2" wheels.

Features:

Driver's-side and passenger's-side electric brakes measure 12" x 2". Brake pads are made of durable friction material for improved braking and longevity. E-coated backing plates resist rust. Fit 14-1/2" to 16-1/2" wheels.

Features:

Driver's-side and passenger's-side electric brakes are 12" x 2". Durable friction material provides improved braking and longevity. Dacromet-coated backing plates are corrosion resistant. Fit 14-1/2" to 16-1/2" wheels.