2019 GMC Canyon Roof Rack

Features:

This stylish, aerodynamic Yakima roof rack gives you the space to carry gear on your vehicle. Rubber strips in the top channels push down to load carriers or accessories - no need to trim. Installs on your vehicle's naked roof.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

This stylish, aerodynamic Yakima roof rack gives you the space to carry gear on your vehicle. Rubber strips in the top channels push down to load carriers or accessories - no need to trim. Installs on your vehicle's naked roof.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

Adapt your camper shell, hard tonneau, or hardtop resin roof to carry gear with this roof-rack system. Locking, Quick Mount legs mount to tracks. Black, Vortex Aero crossbars accommodate clamp-on and channel-mount gear.

Installation Notes:

Drilling required for installation

Features:

Adapt your camper shell, hard tonneau, or hardtop resin roof to carry gear with this roof-rack system. Locking, Quick Mount legs mount to tracks. Black, Vortex Aero crossbars accommodate clamp-on and channel-mount gear.

Installation Notes:

Drilling required for installation

Features:

Adapt your camper shell, hard tonneau, or hardtop resin roof to carry gear with this roof-rack system. Locking, Quick Mount legs mount in rack tracks. Heavy-Duty black, square, aluminum crossbars slide along tracks to accommodate your gear.

Installation Notes:

Drilling required for installation

Features:

Adapt your camper shell, hard tonneau, or hardtop resin roof to carry gear with this roof-rack system. Locking, Quick Mount legs mount in rack tracks. Heavy-Duty black, square, aluminum crossbars slide along tracks to accommodate your gear.

Installation Notes:

Drilling required for installation

Features:

Adapt your camper shell, hard tonneau, or hardtop resin roof to carry gear with this roof-rack system. Locking, Quick Mount legs mount in rack tracks. Heavy-Duty black, square, aluminum crossbars slide along tracks to accommodate your gear.

Installation Notes:

Drilling required for installation

Features:

Adapt your camper shell, hard tonneau, or hardtop resin roof to carry gear with this roof-rack system. Locking, Quick Mount legs mount in rack tracks. Heavy-Duty black, square, aluminum crossbars slide along tracks to accommodate your gear.

Installation Notes:

Drilling required for installation

Features:

These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack. The square bars have top channels for mounting Rhino-Rack contractor-grade accessories. Installs on your vehicle's naked roof.

Features:

These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack. The square bars have top channels for mounting Rhino-Rack contractor-grade accessories. Installs on your vehicle's naked roof.

Features:

This quiet, aerodynamic roof rack with a from-the-factory look lets you carry gear on your vehicle's naked roof. Sturdy, lightweight aluminum crossbars include top channels with noise-reducing Vortex strips. Integrated locks deter theft.

Features:

These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack. The square bars have top channels for mounting Rhino-Rack contractor-grade accessories. Installs on your vehicle's naked roof.

Features:

These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack. The square bars have top channels for mounting Rhino-Rack contractor-grade accessories. Installs on your vehicle's naked roof.

Features:

This heavy-duty, versatile Yakima roof rack comes with strong, aluminum crossbars. It works with channel-mount and clamp-on accessories, plus each bar has tie-down points on the endcaps. Installs on your vehicle's naked roof.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

This heavy-duty, versatile Yakima roof rack comes with strong, aluminum crossbars. It works with channel-mount and clamp-on accessories, plus each bar has tie-down points on the endcaps. Installs on your vehicle's naked roof.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

This stylish, aerodynamic Yakima roof rack gives you the space to carry gear on your vehicle. Rubber strips in the top channels push down to load carriers or accessories - no need to trim. Installs on your vehicle's naked roof.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

This stylish, aerodynamic Yakima roof rack gives you the space to carry gear on your vehicle. Rubber strips in the top channels push down to load carriers or accessories - no need to trim. Installs on your vehicle's naked roof.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

These strong, galvanized steel crossbars supply the backbone for this Yakima roof rack. The rack works with accessories that clamp around the bars. Vinyl coating helps resist corrosion. Installs on your vehicle's naked roof.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

These strong, galvanized steel crossbars supply the backbone for this Yakima roof rack. The rack works with accessories that clamp around the bars. Vinyl coating helps resist corrosion. Installs on your vehicle's naked roof.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

These crossbars combine the strength of steel with an aerodynamic shape to create a heavy-duty yet quiet roof rack for your vehicle. Full-length bars work with most clamp-on accessories. Installs on your vehicle's naked roof.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

These crossbars combine the strength of steel with an aerodynamic shape to create a heavy-duty yet quiet roof rack for your vehicle. Full-length bars work with most clamp-on accessories. Installs on your vehicle's naked roof.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

Built for off-road use, this platform rack's large, flat surface accommodates loads of all shapes and sizes. Roof rack legs install to ditch brackets on your vehicle's naked roof. Compatible with many Rhino-Rack accessories.

Features:

This aerodynamic, flush-mount roof rack lets you carry gear and cargo on your vehicle while maintaining a clean, factory look. Crossbars work with channel-mount and clamp-on accessories. Installs on your vehicle's naked roof.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

This aerodynamic, flush-mount roof rack lets you carry gear and cargo on your vehicle while maintaining a clean, factory look. Crossbars work with channel-mount and clamp-on accessories. Installs on your vehicle's naked roof.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

Adapt your camper shell, hard tonneau, or hardtop resin roof to carry gear with this roof-rack system. Locking, Quick Mount legs mount to tracks. Black, Vortex Aero crossbars accommodate clamp-on and channel-mount gear.

Installation Notes:

Drilling required for installation

Features:

Adapt your camper shell, hard tonneau, or hardtop resin roof to carry gear with this roof-rack system. Locking, Quick Mount legs mount to tracks. Black, Vortex Aero crossbars accommodate clamp-on and channel-mount gear.

Installation Notes:

Drilling required for installation

Features:

Adapt your camper shell, hard tonneau, or hardtop resin roof to carry gear with this roof-rack system. Locking, Quick Mount legs install easily in RTC-style tracks. Heavy-Duty square, aluminum crossbars slide along tracks to accommodate your gear.

Installation Notes:

Drilling required for installation

Features:

Adapt your camper shell, hard tonneau, or hardtop resin roof to carry gear with this roof-rack system. Locking, Quick Mount legs install easily in RTC-style tracks. Heavy-Duty square, aluminum crossbars slide along tracks to accommodate your gear.

Installation Notes:

Drilling required for installation

Features:

This Thule roof rack lets you carry cargo and gear on your vehicle. Aerodynamic crossbars with split rubber strips in top channels work with channel-mount and clamp-on accessories. Installs on your vehicle's naked roof.

Features:

This strong Thule roof rack lets you carry gear on your vehicle. Galvanized steel crossbars accommodate clamp-on accessories. Polymer coating provides extra grip for your cargo. Installs on your vehicle's naked roof.

Features:

This sleek, sturdy platform rack lets you carry all the gear you need for your adventure. Aerodynamic wind fairing accommodates a 40" lightbar (sold separately). Installs in the ditches of your vehicle's roof.

Installation Notes:

Drilling required for installation

Features:

This sleek, sturdy platform rack lets you carry all the gear you need for your adventure. Aerodynamic wind fairing accommodates a 40" lightbar (sold separately). Installs in the ditches of your vehicle's roof.

Installation Notes:

Drilling required for installation

Features:

This Thule roof rack lets you carry cargo and gear on your vehicle. Aerodynamic crossbars with split rubber strips in top channels work with channel-mount and clamp-on accessories. Installs on your vehicle's naked roof.

Features:

This sleek, sturdy platform rack lets you carry all the gear you need for your adventure. Aerodynamic wind fairing reduces drag. Installs in the ditches of your vehicle's roof. Works with many Front Runner accessories.

Installation Notes:

Drilling required for installation

Features:

This sleek, sturdy platform rack lets you carry all the gear you need for your adventure. Aerodynamic wind fairing reduces drag. Installs in the ditches of your vehicle's roof. Works with many Front Runner accessories.

Installation Notes:

Drilling required for installation

Features:

Made for the adventurer, this platform rack's large, flat surface lets you carry all types of cargo and gear. Installs in the ditches of your vehicle's roof - drilling required. Works with many Front Runner accessories.

Features:

Made for the adventurer, this platform rack's large, flat surface lets you carry all types of cargo and gear. Installs in the ditches of your vehicle's roof - drilling required. Works with many Front Runner accessories.

Features:

This aerodynamic Thule roof rack mounts flush on your roof for a sleek, factory look. Crossbars with split rubber strips in top channels work with channel-mount and clamp-on accessories. Installs on your vehicle's naked roof.

Installation Notes:

Tech Tip:

Installation of the fit kit will displace the weather seal. Carefully install the included weather sealing strips included with the fit kit.

Features:

This aerodynamic Thule roof rack mounts flush on your roof for a sleek, factory look. Crossbars with split rubber strips in top channels work with channel-mount and clamp-on accessories. Installs on your vehicle's naked roof.

Installation Notes:

Tech Tip:

Installation of the fit kit will displace the weather seal. Carefully install the included weather sealing strips included with the fit kit.

Features:

Made for the adventurer, this platform rack's large, flat surface lets you carry all types of cargo and gear. Installs in the ditches of your vehicle's roof - drilling required. Works with many Front Runner accessories.

Installation Notes:

Drilling required for installation

Features:

Made for the adventurer, this platform rack's large, flat surface lets you carry all types of cargo and gear. Installs in the ditches of your vehicle's roof - drilling required. Works with many Front Runner accessories.

Installation Notes:

Drilling required for installation

Features:

Built for off-road use, this aerodynamic platform rack's large, flat surface accommodates loads of all shapes and sizes. Backbone mounting system provides a stable mounting surface for the platform. Compatible with many Rhino-Rack accessories.