Parts Needed to Install Tekonsha Prodigy P3 on 2025 Peterbilt 536
Updated 10/30/2025 | Published 10/07/2025
Products Featured in This Question
Question:
looking for an installation kit harness for a 2025 Peterbilt 536 I have the Tekonsha P3 controller to be connected to a seven RV style trailer plug.
asked by: Jim
Expert Reply:
Hi Jim; I'm assuming you either don't have trailer wiring or you have a 7-pole round connection which won't match up with your standard trailer connections. To install the Tekonsha Prodigy P3 Trailer Brake Controller # 90195 you will need to add a 7-way blade like you said.
Start by adding a 4-way # C59236 and then you can upgrade it to a 7-way using the # ETBC7, additional wire # 10-2-1 will probably be necessary as well due to the length of the truck. You also need to check to see if you can access the stop light circuit for brake controller installation. If this is not possible, the Roadmaster Universal Stop Light Switch Kit # RM-751000 will also be required.
What are you towing with your Peterbilt?
(click to enlarge)
Product Page this Question was Asked From
Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Splice-In
- Under-Dash Box
- Under-Dash
- Up to 4 Axles
- LCD Display
- Multiple Trailers
- Tekonsha
more information >
Featured Help Information
Instructions
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: What is the Difference Between the Tekonsha Prodigy P2 and the P3 Brake Controllers
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Installing an Electric Brake Controller on 2007-2013 GM Full-Size Truck or 2007-Present GM SUV
- Article: Aftermarket Brake Control Wiring for 07-13 GM Full-Size Truck with Factory-Integrated Brake Control
- Q&A: Brake Controller Wiring for Ford E-450 Motorhome
- Q&A: Brake Controller Recommendation for a Truck with Air Brakes and a Trailer with Electric Brakes
- Q&A: Should I Get a Proportional or Time-Delayed Brake Controller
- Q&A: Is There Downside to Going with 7500 Air Lift Kit Over 5000
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
Robin H.
10/30/2025
Hey Jim, how did things go getting the Tekonsha P3 controller wired on your Peterbilt 536? Did the ETBC7 kit and extra 10-gauge wire give you the reach you needed? Your update could make it easier for others working on similar trucks.