How Long Should RV Covers Last?

Question

Question:

My last RV cover ADCO lasted only 4 years and is falling apart and now in the trash. What is the bestinch longest lasting material for RV covers? I live in Michigan and store the trailer outside 48 weeks out of the year. Thank you.

asked by: David B

0

Expert Reply:

Hello David, thanks for reaching out. Honestly, 3-5 years is a pretty typical lifespan for an RV cover. They are designed to be a sacrificial layer to protect your RV from the elements. So the cover takes the beating instead of your RV. They will inevitably wear out after a few seasons. It could be from small rips and tears, or just standard wear and tear from the elements. True, a nice cover should last longer compared to a budget option, but still 3-5 years is the expected lifespan realistically.

The Adco Olefin DH or All Climate covers are generally regarded as the most durable. We do have our etrailer brand of covers which are very comparable. So if you are out on the Adco, we may have an option for you.

What RV do you have? How long is it? Reply on this page and let me know and I am happy to make a recommendation.

expert reply by: Jesse M

0

Dave B.

6/8/2025

Thank you… I have the 2021 Kodiak ultralight 248BHSL. From outside the rear bumper to the front tongue ball it is 28‘11“. I believe the body of the trailer is about 24 feet.. thanks again.

Jesse M.

6/9/2025

@DaveB Nice. We do go off the body length which is actually tough to find online so thanks for providing that. I know you were not happy with the Adco cover, but we do have the Adco SFS AquaShed RV Cover # 290-52243 which will be a good fit. We also have our etrailer brand cover # e37VV. I have had a few chances to compare these covers side by side and they are very similar. The material of the etrailer cover is a bit more lightweight but it is a very similar multi layer breathable material. It has vents built into the top to help release moisture. We actually have one of these covers on a trailer here at the shop. It held up just fine thru the winter and we had a lot of winter weather and storms here in Missouri so it definitely took some abuse. We even had a few close calls with tornadoes. The only damage done to the cover was self-inflicted because we used the cover for training purposes and we had a bunch of different people install and remove it a bunch of times. So if you want to get away from the Adco, the etrailer # e37VV is a nice, more affordable option. Take a look at this video.

Helpful Links

tv-review-adco-sfs-aquashed-travel-trailer-cover-290-52241.aspx

Answer 1

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 2

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 5

Hey Larry! Yes, the Onan Generator - QG 7000i Onboard RV Generator #CM44MR is capable of using a remote start. For a standard setup, you can use a switch like #CM86RR along with an extension harness #CM26RR. You can also use the EC-AGS+ Auto…

view full answer...

Answer 6

Hey Lauris! Is the Brinkley prepped for a generator or are you saying it has room for one? If it doesn't have some kind of generator prep you're going to need a lot of parts from Cummins to install #CM44MR. You will have to add a fuel tank,…

view full answer...

Answer 7

Hey Jerry, GM moved the placement of their puck systems starting with 2020 models so you are correct that the pucks would have the hitch not sit directly over the axle. GM did the math and made sure that this placement wouldn't adversely affect…

view full answer...

Answer 8

Hi Dennis! While the Curt RockerBall Shock Absorbing Gooseneck Hitch Ball - 2-5/16" Diameter - 30K #C67DR is definitely not a bad choice. Especially since you have multiple trailers you pull. We do have fairly mixed reviews on the page, but I…

view full answer...

Answer 9

Hello KRT, Wow, congrats on the new Chevy! What is your favorite new feature? Yes, the Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" #C52NR will fit your 2025 Chevy Silverado 2500HD ZR2 even with the AEV heavy duty bumper. I attached…

view full answer...

Answer 10

Hi Glen, It will depend on what the GVWR (gross vehicle weight rating) is of your trailer to determine which B&W 5th wheel to gooseneck adapter will work best for you. Fifth wheels and gooseneck trailers go off of pin weight instead of tongue…

view full answer...

Answer 11

Hi Mark, If you have a Furrion Chill Cube 18K air conditioner like the part #FR27TD, that unit comes with a built-in soft start to keep current spikes low when the compressor kicks on, so you won't need to install one. If you have a Furrion Chill…

view full answer...

Answer 12

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

How Long Should RV Covers Last?

Product Page this Question was Asked From

Continue Researching