Can The Blaylock Wheel Lock Be Keyed To Match CRS Lock?

Question

Question:

We have an existing Blaylock EZ Trailer Wheel Lock - Aluminum - 13 to Small 15 Wheels Part Number: BLEZ-300. We would like the lock/key to match our existing. It is a CRS lock with Key 023.

asked by: Shannon

0

Expert Reply:

Hello Shannon, thanks for reaching out. We can definitely get you one of the Blaylock EZ Trailer Wheel Locks # BLEZ-300, but unfortunately there is no way for us to match the key to your CRS lock. The Blaylock lock will use its own key. We can only key these alike if the lock/product is identical. Like if you were to order say four of the Blaylock locks, and you selected the keyed alike option, all four of the lock you receive would have the same key. I wish we had a way to match it but there is just no way to guarantee a specific key number since we are limited to what we have here in stock.

expert reply by: Jesse M

0

Shannon

12/4/2024

Thanks for the fast response.... Could I order one Blaylock Trailer lock with TWO LOCKS keyed alike?

Jesse M.

12/4/2024

@Shannon The Blaylock # BLEZ-300 comes with the wheel claw and one locking pin. We would not have a way to provide one with two locks since that is how it comes to us from the manufacturer. If you were to order two at once and select the "keyed alike" option you would get two locks with the same key number but you would get tow claws too.

Answer 1

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 2

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 3

We do have the Trimax Trailer Wheel Chock and Lock (12" - 15" Wide Tires) #TMX72ZR listed a little odd, but hopefully the following will help clear things up. The #TMX72ZR will fit the following sizes: 4.8"-R12 195/75 R14 205/60 R15…

view full answer...

Answer 4

The Dexter Trailer Hub and Drum Assembly - 3,500-lb E-Z Lube Axles - 10" - 5 on 4-1/2 - Galvanized #8-247-50UC3-EZ uses 1/2 inch studs so the lug nuts will be 1/2 inch inner diameter and 13/16 inch outer diameter like #CE11051. If instead you…

view full answer...

Answer 5

Trailer wheel lug nuts that are 1/2-inch inside diameter typically have a 20-TPI thread pitch (20 threads per inch). Most lug nuts also use a 60-degree-coned profile like #CE11051, but a 90-degree like #STN569 is also available for 9/16-inch studs.…

view full answer...

Answer 6

While the smaller Ultra-Fab Chock and Lock Wheel Stabilizer for Tandem-Axle Trailers and RVs #UF21-001060 will initially fit, I do recommend going with the larger Ultra-Fab Chock and Lock Wheel Stabilizer for Tandem-Axle Trailers and RVs…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

From the pictures you sent in, it looks like the hinge assembly itself rusted through and ripped off. It seems like it may have been fabricated by the previous owner. That latch style is usually accompanied with a bar like with the Cam-Action…

view full answer...

Answer 9

Hey Dan, A 205/75R15 tire has an 8.07" width so the Trimax Trailer Wheel Chock and Lock #TMX85FR would be a compatible fit. I've attached a short video below where Adam will show you how this lock works.

view full answer...

Can The Blaylock Wheel Lock Be Keyed To Match CRS Lock?

Product Page this Question was Asked From

Continue Researching