Availability Of Individual Bracket From Roadmaster Stop Light Switch Kit RM-751496

Updated 07/29/2024 | Published 07/25/2024

Question:

I have a 2012 Jeep Wrangler Rubicon Standard 6-spd Transmission. Can i buy just the Roadmaster Momentary brake switch bracket for this?

asked by: Chris

Expert Reply:

Thanks for reaching out, Chris. It sounds like you are looking for just the metal bracket that comes with the Roadmaster Stop Light Switch Kit # RM-751496. Regrettably, this piece is not available by itself and the only way to get one is to get the complete stop light switch kit.

expert reply by: Jesse M

Chris

7/26/2024

Ok thanks

Chris

7/26/2024

One other question; -Installed Blue Ox EZ 88825 Harness with the diode built in on the 12’ Jeep Wrangler Rubicon. White to chassis ground -Installed Invisibrake 8700 -Installed Roadmaster Baseplate for Crossbar flat towing with removable arms -Installed 6-pin connector and have 6-pin to 7-pin umbilical to Motorhome -i have a a momentary brake switch so i’ll buy kit to get the bracket. - i have 12-v power on center of the 6-pin this runs to (+) of battery of Towed vehicle, i believe with a 30-amp fuse in line? - the invisibrake 4-square connector has been spliced into the BlueOx harness wires from vehicle and into the female 6-pin connector. White to chassis ground. - I will wire the invisibrake flat connectors Red to (+) with its inline fuse on batt and black to (-) the disconnect is wired in as well. To front of towed veh. - On this vehicle are there any other necessary items for flat towing or other needs??

Jesse M.

7/29/2024

@Chris Hey Chris; it sounds like you are definitely on top of things with your flat tow install. The 2012 Wrangler is fairly straightforward as far as flat towing goes. I do not see any key components missing from your list, and it sounds like you have everything hooked up correctly. The only thing I can think of is you may need a drop hitch such as part # BLU28XR. This is only needed is there is a height difference of more than 3" between the base plate arms and the hitch on your motorhome. Aside from that, you have everything covered. The link below will show you our install video for the invisibrake on a 2014 Wrangler. I believe you will find it helpful. Let me know if you have any other questions.

Helpful Links

tv-install-roadmaster-invisibrake-2014-jeep-wrangler-rm-8700.aspx