Can Curt E16 Fifth Wheel Hitch be Used in Pucks of 2018 Chevy Silverado

Question

Question:

can I use this hitch with a adaptor plate for a 2018 duramax with recessed holes below the bed rails?

asked by: David

0

Expert Reply:

You can use the Curt E16 fifth wheel hitch part # C16115 in the bed of your 2018 Chevy Silverado with the OEM pucks but you would need to use the adapter part # C47BR which converts the pucks to the rail kit style this hitch needs.

expert reply by: Jameson C

0

Answer 1

Yes, the Curt Q25 5th Wheel Hitch item #C16069 will fit in the factory puck system of a 2018 Chevy Silverado 2500. The base of this hitch will drop right down into the factory pucks. This hitch is recommended for trucks with the longer 8' beds or…

view full answer...

Answer 2

For your 2019 GMC Sierra 3500 you will want the Curt Q25 5th Wheel Trailer Hitch w/ R24 Slider item #C16566. This hitch has a 24,000 lbs capacity and is our highest capacity slider. The 2-jaw locking system gives you less rattle and more security. It…

view full answer...

Answer 3

Cooper, you're just going to need the Adapter Rails for Curt 5th Wheel Hitch #C47BR. This adapter will pop into your OEM pucks and provide a mounting point for your Curt A20 5th Wheel Trailer Hitch.

view full answer...

Answer 4

Yes, the Adapter Rail for Curt 5th Wheel Hitch's part #C88KR which is a fit for a 2021 Chevrolet Silverado 3500 will work with a Reese 16K 5th Wheel Hitch. They are simply above bed rails so they will work with Curt, Reese, Husky etc. hitches.

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Hey Jerry, GM moved the placement of their puck systems starting with 2020 models so you are correct that the pucks would have the hitch not sit directly over the axle. GM did the math and made sure that this placement wouldn't adversely affect…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Can Curt E16 Fifth Wheel Hitch be Used in Pucks of 2018 Chevy Silverado

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching