Availability of Trailer Axle with 4 inches of Drop and Higher Capacity than 5k
Published 10/18/2023
Question:
Hello Etrailer, Do you have gavalnized axle with a 4 or 5 with more than 5000 pounds weight capacity? Thanks.
asked by: Ben N
0
Expert Reply:
We have axles that have 4 inches of drop that are rated for more than 5k like with the # 8327860 which is rated for 7k but we do not have any galvanized axles at this time.
To see all of the axles we offer with a 4 inch drop check out the link I attached on this page.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles - 95" Long - 7,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- No Hubs
- 7000 lbs
- Spindles Only
- 79-1/4 Inch Spring Center
- 95 Inch Hub Face
- Drop - 4 Inch
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Can a Trailer Hitch be Installed on the Back of a Trailer
- Q&A: What is Needed to Upgrade From 3,500 lb to 5,200 lb Axle
- Q&A: What Does Hole In Rear Hanger For 2-1/2" Wide Hanger Used For?
- Article: Double-Eye Trailer Suspension System Review
- Q&A: Availability of Grease Seal Ring for Seal on 22834 Trailer Hub
- Q&A: Slipper Spring Hanger Positioning for 7,000 lb Tandem Axle
- Q&A: Replacement Hydraulic Drum Brakes for Dico 15638
- Q&A: Lug Nut Upgrade for Lionshead LR103 Capped 1/2" Lug Nut
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Wiring Diagrams
- Article: Brake Controller Installation: Starting from Scratch
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Top Gifts for Dads in 2024