Recommended 7-Way Connector for a 2015 Kia Sportage  

Question:

Expert Reply:

Since your 2015 Kia Sportage already has a 4-way installed, you will need the Universal Installation Kit for Trailer Brake Controller item # ETBC7. The kit includes a pre-wired 7- and 4-way trailer connector that mounts easily at the rear of your Kia with an included bracket. This kit is designed for use on a vehicle, like yours, with an existing 4-way flat trailer connector and plugs directly into it.

You will then connect the blue wire to the blue wire on the brake controller, connect the black wire to the positive post on your Kia's battery, the white wire to ground, and the yellow wire to your Sportage's reverse circuit if applicable. This will provide you with the ability to control your trailer's brakes and also provide you with a 12v power wire for your trailer's accessory lights.

There are no custom fit options which is why you will need to use a universal 7-Way.

You are also going to need a brake controller, I recommend the Redarc Tow-Pro Liberty Trailer Brake Controller item # RED24FR. This is a proportional brake controller that automatically adjusts your trailer's braking based on the deceleration of your Kia. The Liberty has a unique installation method where the main unit is concealed behind your dash and the only part visible is the control knob.

You will need the Universal Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item # RED69FR to complete the installation, since your Kia does not have a port to plug directly into.

To round out your towing setup I recommend the Curt Towing Starter Kit for 2" Hitches item # C45534. This towing kit will provide you with a 2" ball and a fixed ball mount with a 3/4" rise and 2" drop. It also includes a hitch pin and clip, hitch receiver lock with keys, hitch cover, and a storage case.

expert reply by: Jerred H

0