Inno Gutter Mount Roof Rack for a 2001 Toyota Tundra with Gutters

Question

Question:

I am interested in your Inno Roof Rack Systems for my 2001 Toyota Tundra Access Cab. My vehicle has gutters on the cab that can be used to mount a rack.

asked by: Evan H

0

Expert Reply:

I have a great option for you from Inno since your 2001 Toyota Tundra has gutters to mount the roof rack.

You will want to use the Inno Feet for Square Crossbars # INSD. These feet are a gutter mount style, so they will attach directly to the gutters on your Tundra and allow you to use the Inno Square Crossbars # INB137.

expert reply by: Scott S

0

Answer 1

Thank you for the photos! It looks like if you flip the Rhino-Rack J-Style Kayak Carrier #S512 so the J-Cradles are hanging out over the Prinsu rack you should be able to move the clamping mechanism further out to the side for better clearance.…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Hey Jason, whenever available I would recommend going with the channel attachment for roof rack accessories including the Thule Hullavator part #TH898 as its simpler stronger, and it's basically the future of most roof rack accessories as it…

view full answer...

Answer 5

Hello John, thanks for reaching out. Yes, we do have a Thule roof rack that will allow you to install the Hullavator #TH898 on your 2015 Subaru Forester. For that I recommend the following: - Thule WingBar Evo Roof Rack for Raised Rails - Aluminum -…

view full answer...

Answer 6

I have included a image below showing one of the Thule roof racks installed on a Jeep Wrangler having the Sky One-Touch roof. They used the Crossbars #TH711520 with the 8" Tall Feet #TH33ZR. I could not find any images with the roof open but you…

view full answer...

Answer 7

The Inno Feet for Square Crossbars are offered in a few different heights, 5.5" part #IN72FR, 7.5" part #INSD, and 9-7/8" part #INMDK. In order to see which is the best option for a 2019 Jeep Wrangler Unlimited with Sky Roof,…

view full answer...

Answer 8

According to my research, the ATC truck bed caps used Rhino-Rack RTC-Style Roof Rack Tracks like part #RTC16. Therefore, I recommend taking a look at the Heavy-Duty Crossbar System part #RLTP-2 and part #RB1500B-2. The heavy-duty cross bars have a…

view full answer...

Answer 9

Yes! I confirmed with Inno that the Inno Feet for Square Crossbars - Rain Gutters -5-1/2" #IN72FR and the Inno Square Crossbars - Steel - Black - 65" Long #INB165 are confirmed to fit you 2005 Chevy Express Van 3500.

view full answer...

Answer 10

I have the part you need! Since Thule discontinued their old feet that are compatible with the older square crossbars without a bottom channel, Thule doesn't make feet that are compatible. However, Inno uses the same exact square crossbar…

view full answer...

Answer 11

Hi Marvin; the Replacement Printed Circuit Board for MaxxAir Manual Lift RV Roof Vents #MA10A21276K won't be any different than your current 10B21276KZ and is the correct replacement. They have updated the model number over the years as they…

view full answer...

Answer 12

Hello Cameron, I can definitely help with that. The best option for a low-profile roof rack for your 2016 Chevy Express Van is the Inno Square Bar Roof Rack. The complete rack consists of the following parts: Inno Square Crossbars #INB165 Inno Feet…

view full answer...

Inno Gutter Mount Roof Rack for a 2001 Toyota Tundra with Gutters

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching