Inner Diameter Of The LaSalle Bristol Swivel Adapter # 344633216 Hub

Question

Question:

Hi, I need to find out what the exact inside diameter is for the non-threaded portion of part number 633216. Thank you!

asked by: Tim P

0

Expert Reply:

The non-threaded hub portion of the LaSalle Bristol Swivel Adapter for RV Sink Strainer # 344633216 has an inner diameter of 1-5/8" so that it can allow for a 1-1/2" pipe to slip into it. For this attachment you'll want to use LaSalle Bristol ABS Solvent Cement # 3447530889 to secure the pipe to the fitting.

expert reply by: Kevin C

0

344633216 Hub ID
(click to enlarge)

Answer 1

Hey Ryan, so there isn't a special type of pipe that the LaSalle Bristol RV Shower Drain w/ Grid Strainer #34433JN1202 is designed to only work with. The PVC or polyurethane you mentioned from Home Depot would work great.

view full answer...

Answer 2

Yes, the LaSalle Bristol RV Shower Drain #34465CAR227G referenced in your question will just be threaded into a 1-1/2 inch PVC P-trap like what you have. This is the standard opening size so this should work perfectly for you. The actual outside…

view full answer...

Answer 3

When installing the surrounds we offer like the Better Bath part #LC3210398 you will need to use an ABS compatible, pressure-sensitive adhesive tape or spray adhesive. I really popular solution is Loc Tite PL550 which isn't something we carry at…

view full answer...

Answer 4

Thank you for the photo of your RV's P-trap. We offer one RV plumbing P-trap, Valterra RV Sewer P-Trap #D50-2215 that you referenced in your question, which is detailed in the linked photo. This part uses 1-1/2-inch fittings and installs using…

view full answer...

Answer 5

The Camco RV Drain Trap part #CAM37262 is designed to screw onto the bottom of a sink and then ran outside the trailer with a drain hose similar to the Camco RV Drain Hose w/ Drain Trap and Evacuation Flange part #CAM37420. It is not really designed…

view full answer...

Answer 6

I believe we have exactly what you're looking for. I went out to the warehouse and personally measured the LaSalle Bristol P-Trap Fitting for RV Sewer System #344633211N and measured 3-1/2" from the middle of the fitting to the first bend in…

view full answer...

Answer 7

Please take a look at these options, the LaSalle Bristol RV Shower Drain, #34465CAR227G, ##34465WAR227G, #34465PR227G. These all have a threaded section of 1-7/8". Note product review videos please.

view full answer...

Answer 8

Hey Phillip not sure what size drain you need but we've got three different options so I am sure one of them will work. I don't have a database that shows me what parts or on your trailer so I can't look it up. I have listed three of our…

view full answer...

Answer 9

Not at all! The UniGuard Waterless P-Trap for RV Sewer Systems #LSB24FR can actually be installed in the horizontal or vertical position, whichever works better for your application. The idea of this product is to help save valuable space in your RV…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Inner Diameter Of The LaSalle Bristol Swivel Adapter # 344633216 Hub

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching