Will The Lippert High-Speed Power Stabilizer Jack Fit The Frame Of A 2023 Jayco Jay Flight 265RLSW

Updated 06/27/2023 | Published 06/26/2023

Products Featured in This Question

Ultra-Fab Power Twin II Electric Stabilizer with Dual Motors - 30" Lift - 6,000 lbs

(101)

$1133.12

Question:

i HAVE A 2023 Jay Flight 265RLSW. I would like to install the stab jacks LC298707.Thier are 2 separate product sheets. overall dem. 78 X20 wide X4 3/4 tall. I have measured 68 1/4 Outside to Outside between frame, Will it mount? thank you

asked by: Harry J

Expert Reply:

The Lippert High-Speed Power Stabilizer Jack # LC298707 would not be able to mount to your frame since you only have 68-1/4" from outside to outside edge and this stabilizer requires a 68-11/16" spacing. Instead I recommend installing the Ultra-Fab Power Twin II Electric Stabilizer with Dual Motors # UF39-941705 since they are adjustable to fit frame widths from 40" to 80".

The # UF39-941705 also has a major advantage over the # LC298707 since has lifting/leveling capabilities, whereas the # LC298707 can only be used as a stabilizer. We receive a ton of calls and emails each week because someone tried to lift the trailer with the # LC298707 and ended up bending the legs. Lippert doesn't sell replacement legs so if you bend them you have to completely replace the system.

The # UF39-941705 has a 6,000lb capacity when the legs are extended to 30" and 3,000lbs when extended to 15". It has two separate motors and switches so that you can level your trailer with ease. Overall it is the clear choice over the Lippert # LC298707.

expert reply by: Kevin C