What Does AT93312 Harness Connect To

Question

Question:

Im looking for a Replacement 4-Wire Control Harness for Atwood Water Heater. My RV is a 2016 Hartland Pioneer RG28 toy hauler. I cant seem to find the right match on your site. Control panel says Water Heater #62659 and MPD 91818. Your item # AT93312 looks right but I want to be sure I get the right part. Can you help please?

asked by: Michael O

0

Expert Reply:

I can't find anything regarding a water heater number 62659 or MPD 91818, and you'll have to know your water heater's model number. The Replacement 4-Wire Control Harness # AT93312 connects to the Control Panel # AT91367, and the pair fits Atwood water heater models G6A-2E, G6A-6E, G6A-7E, G6A-8E, GH6-3E, GH6-6E, GH6-7E, GH6-8E, G10-1E, G10-2E, G10-3E, GH10-1E, G10-3E, GC6A-7E, GCH6-4E, GCH6-6E, and GCH6-7E.

expert reply by: Kyle S

0

Answer 1

I would first start by making sure that there isn't a leak anywhere on the water heater that would tell the system to keep heating up water. If you've confirmed that there isn't a leak anywhere on the system, you'll next want to check…

view full answer...

Answer 2

We do carry the Dometic RV Water Heater #DMC74FR which you could use to replace your Atwood G6A-8E 6 gal RV Water Heater, but I highly recommend switching over to a tankless system like the Furrion RV Tankless Water Heater 60,000 BTU #FR98SR. This…

view full answer...

Answer 3

Hi Steve; for a replacement switch compatible with your Atwood G6A-8E we have the #AT91959 or #AT91859. I also attached a wiring diagram below.

view full answer...

Answer 4

Hi Charles, The part diagram I can find for the Atwood GC10A-3E shows 91367 so the #AT91367 would be the correct replacement for your water heater's control panel.

view full answer...

Answer 5

I went ahead and reached out to Dometic (the makers of Atwood), and they said that they do not recognize the circuit board with a model number of 93257. However, we do carry the gas-only control panel. That is part #AT91367. This particular control…

view full answer...

Answer 6

I was able to find out from Dometic, who took over Atwood's water heater division and the Replacement Control Panel #AT91367 you were looking at will be the correct part.

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

What Does AT93312 Harness Connect To

Products Featured in This Question

Continue Researching