Is There Minimum Distance Between Crossbars of Rhino-Rack Vortex Crossbars for Retrax XR  

What I would do is go out to your truck and measure out 71 inches and 65 inches on a tape measure and compare that to the width of your bed. If you think the 71 inch looks better and would suit your needs then that's what you would want to go…

For a roof rack/crossbar setup that fits the tonneau cover channels you have on your truck the Rhino Rack Vortex Crossbar Setup part #RRVA180B-RRRLT600 that you referenced is what I would go with if I were you. This gives you a higher quality setup…

Hey Parvez, glad I could help! So the Rhino Rack Vortex Crossbars for Retrax XR tonneau covers part #RRVA180B-RRRLT600 was designed specifically to work with your RetraxOne XR tonneau cover so it is going to definitely have enough clearance above…

I'd be happy to recommend a cargo carrier to fit with the Rhino-Rack Vortex Crossbars for Retrax XR and Mountain Top EVO-M Tonneau Covers #RRVA180B-RRRLT600 on your 2022 Ford F-250 Super Duty! I really like the 53" x 49" Yakima OffGrid…

The most cost effective Rhino-Rack setup for a Rextrax XR Tonneau Cover is the Rhino-Rack Vortex Crossbar System for Retrax XR Series and Mountain Top EVO-M Tonneau Covers part #RRVA180B-RRRLT600. If you're interested in the ProBar Evo, that is…

The RetraxPRO XR Hard Tonneau Cover that fits the 2019 Toyota Tundra 5-1/2-foot bed with the deck rail system is part #RTT-80841 and this cover can be fitted with 65-inch Rhino-Rack crossbars. Order #RRVA165B-RRRLT600. Install instructions are linked…

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

We do have the parts needed for a Thule Wingbar EVO to fit the slots of a Retrax cover but not as a complete kit. Here's what you'd need: 60" WingBar Evo Crossbars - #TH711520 Evo Clamp Feet - #TH710501 Fit Kit - #TH29TX Lock Core Kit -…

I recommend using the Rhino-Rack Vortex Crossbar System #RRVA180B-RRRLT600 on your 2020 Ford F-150. These crossbars are designed to mount to the T-Slot rails that come on your Roll N Lock tonneau cover. You can pair this with the Rhino-Rack T-Load…

Yes, the Rhino-Rack Vortex Crossbars for Retrax XR and Mountain Top EVO-M Tonneau Covers #RRVA180B-RRRLT600 will fit the Roll N Lock tonneau cover with XT rails.

The weight capacity for the Rhino-Rack Vortex Crossbar System for Retrax XR Series and Mountain Top EVO-M Tonneau Covers #RRVA180B-RRRLT600 would remain the same at 220 lbs for this system even if you were to add another pair of crossbars to this…

For the RetraxPRO XR Hard Tonneau Cover you can use the Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600 which will mount into the t-slots on the side rails. This will be as low profile as pretty much any other option but to make sure the…