Can The Camo RV Heated Drinking Water Hoses Be Daisy-Chained Together?
Updated 01/27/2023 | Published 01/26/2023
Products Featured in This Question
Question:
I have a 50 foot and a 25 foot camco heated hose and would like to connect them as the trailer is a long ways from the spigot. Can I connect the Peet wires together and if yes ..how do I do that? Thx
asked by: Ron D
Expert Reply:
Yes you can indeed connect your Camco RV Heated Drinking Water Hose for Cold Weather # CAM22903 & # CAM22902 hoses together.
All you'd need to do is connect the female end of one hose to the male end on the other and run an extension cord with 14 AWG wire like:
- 50' # A10-5014TTE,
- 100' # A10-10014E.
From here, you should be all set. I have also included a couple of product overview videos for you to check out.
Product Page this Question was Asked From
Camco RV Heated Drinking Water Hose for Cold Weather - 5/8" Internal Diameter - 50' Long
- RV Drinking Water Hoses
- 50 Feet Long
- 5/8 Inch Diameter
- Standard Pressure
- Heated
- Blue
- Camco
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Thank you!
- Q&A: Replacement Harness for a Lippert Leveling Control Brain for 4-Point Leveling System
- Q&A: Length of Warranty on the Camco RV Heated Drinking Water Hose # CAM22903
- Q&A: Spacers for Timbren Suspension Enhancement on 2020 Ford F-250 Super Duty
- Q&A: What Causes a Trailer to Bounce/Porpoise on Highway
- Q&A: Does Timbren Suspension Enhancement Fit 2022 Ford F-350 Tremor
- Q&A: Heated Drinking Water Hose Power Cord Lengths Available
- Q&A: Can The Camco RV Heated Drinking Water Hose Be Daisy-Chained Together?
- Article: Best Vehicles to Flat Tow Behind an RV
- Article: How to Measure a Trailer Axle
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: Converting Your RV Water Heater to Tankless
- Article: Troubleshooting 4 and 5-Way Wiring Installations