Will The Hopkins Tail Light Wiring Kit And Demco Stay-In-Play Duo Work On A 2008 Jeep Wrangler
Updated 11/07/2022 | Published 11/06/2022
Products Featured in This Question
Question:
Will the Demco breaking system #SN99251 work together with the Hopkins #HM56200 turn signal kite on my jeep wrangler?
asked by: Glen P
Expert Reply:
Yes, the Hopkins Custom Tail Light Wiring Kit for Towed Vehicles # HM56200 and Demco SBS Stay-IN-Play DUO Supplemental Braking System # SM99251 would be compatible with your 2008 Jeep Wrangler.
That being said, I'm not a big fan of the plug in diode kits like the # HM56200 because they tend to be wear out quicker and have way more issues than a splice-in diode kit. It can definitely seem scary cutting into the wiring but a splice-in kit like the # RM-15267 is the best way to go to prevent the headache of troubleshooting wiring down the road.
The # SM99251 is designed for use with motorhomes that have hydraulic brakes so you would need to double check the braking system of your motorhome first. If you have air brakes you'll just need the Demco Air Force One Supplemental Braking System for Motor Homes with Air Brakes # SM99243.
To flat tow your wrangler you'll also need a baseplate, tow bar, and safety cables. If you haven't purchased these components already then I have the following recommendations:
Baseplate: Roadmaster Direct-Connect Base Plate Kit # 1429-3. These were designed to fit standard factory bumpers, if you have an aftermarket bumper then let me know and I can find the correct fit for you.
Tow Bar: etrailer SD Non-Binding Tow Bar # e74ZR. This tow bar comes with an adjustable head and shank to help keep it level between your motorhome and vehicle without the need of a high/low adapter. It also comes with safety cables included so that you don't have to purchase those separately.
Since the battery needs to be disconnected I highly recommend installing the Roadmaster Automatic Battery Disconnect with Switch for Towed Vehicle w/ Supplemental Braking System # RM-766 to make it as easy as pressing a button.
I've attached some videos below that will walk you through the installation process so you can complete these at home.
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Vehicle Tow Bar Wiring
- Q&A: No Brake Lights After Custom Tail Light Wiring Kit Installation
- Q&A: Are Extra Diodes Needed w/Trailermate Harness to Stop Back Feed to RV Wiring from 2012 Jeep Wrangler
- Q&A: Recommended Flat Towing System for 2016 Wrangler JK 2 Door
- Search Results: bx88285
- Search Results: trailer hitch
- Shop: Trailer Hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Trailer Wiring Diagrams
- Shop: Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Way Coiled Adapter Cord
- Video: An In-Depth Look at the Roadmaster Battery Charge Line Kit for Towed Vehicles
- Video: An In-Depth Look at the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit
- Shop: Trailer Wiring
- Search Results: trailer wiring
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Which is Better Roadmaster or Blue Ox Tow Bar
- Video: Comparing Portable Flat Tow Braking Systems - Curt RVi and Blue Ox Patriot
- Search Results: base plate for tow bar
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: How to Replace a Lance 6-Pin Plug w/ a Standard 7-Way Connector
- Shop: Suspension Enhancement
- Search Results: tow bar
- Shop: Base Plate for Tow Bar
- Article: How to Measure for Trailer Hitch Drop
- Shop: Blue Ox Patriot Portable Flat Tow Brake System - Proportional
- Video: Breaking Down the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit
- Q&A: Replacing 6-Way on Trailer With 7-Way Connector
- Article: Brake Controller Installation: Starting from Scratch
on Flat Tow Wiring Harness
