Which Slide Topper to Use for Slide Out that Measures 190 inches  

I recommend to use the Solera 16-1/2' Slider part #LCV000435661 which matches the boxes width exactly so you will not have side overhang like we normally recommend but it is the biggest slide topper available to fit the 198" width of…

Those look to be the slide flange-to-flange measurements, and we do have the correct slide toppers in black for each of them: - 74 Inch Measurement: Solera RV Slide-Out Awning #LCV000168105 - 159 Inch Measurement: Solera RV Slide-Out Awning…

To replace your Dometic unit you'll first want to remove the cover for your air distribution box and look for the wire harness that hangs down from the rooftop unit and plugs into the controller. This wire harness will have either a 6-pin or…

Typically you want your slide out topper awning to overhang each side, so I recommend that you use the Solera RV Slide-Out Awning - 5'1" Wide - 48" Projection - Black #LCV000168104. This topper fits RVs/Trailers with slide-outs 57"…

The OEM puck system is optional for Ford pickups so the only way to tell if your 2017 Ford F-250 has the puck system or not is to physically look in the bed for the pucks like what you see in the attached photo. If you do have the puck system then I…

The correct Solera RV Slide-Out Awning for a 12' or 144" slide-out measuring from the outside of each flange is part #LCV000177334 for black and part #LCV000163298 for white.

The Solera Slide Topper Access Kit part #LC795354 includes the "cover" for the main screws. The main screws attach to the small bracket and you camper. The larger portion of it slides over the screws "covering" them then is held…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

I can end this debate for you real fast! Trailer tires, which will have an ST in front of the size, should always be inflated to the maximum psi indicated on the tire. Trailer tires usually do not have a recommended and maximum psi indication so I am…

The newer brackets aren't currently sold separately but I've run into your situation a few times and have just placed the inner bracket on the t-molding instead of on the wall of the slide out. You'll want to get the lower holes in the…

Good morning, Cliff. As of today (3/27/24) we are expecting the #KE33JR tire/wheel combo to be in stock in about 2 weeks. Hopefully this means we can take our own pictures and put them on the site within maybe about 3-4 weeks from now. What I can…

We have the following Gen-Y shock absorbing 5th wheel pin boxes which are compatible with the Lippert Rhino pin box bolt pattern. The weights listed below are the maximum capacities the pin box is capable of supporting. 21,000 lbs - 3.5K TW #GY86GR…