5th Wheel Hitch for a 2019 Ford F-150 with 5.5' Bed Using a Rotating Pin Box

Published 12/29/2021

Question:

I tried to use your hitch ion guide but it has nothing for the 5.5foot bed. I also plan to use the hitch with a Lippert Turning Point Pinbox. Towing a 5th wheel trailer with a GVWR of 10,000 lbs. Is there an application that will work with my setup?

asked by: Steve R

Helpful Expert Reply:

Yes, we have an application that will work with your 2019 Ford F-150 with 5.5' bed and Lippert Turning Point Pin Box. With that set-up you are going to need to use a fixed hitch. I recommend the Reese M5 5th Wheel Trailer Hitch # RP30928. This will attach to industry standard rails in the bed of your truck. The Reese Quick-Install Custom Outboard Installation Kit w/ Base Rails # RP56034-53 are confirmed to fit your 2019 Ford F-150 with 5.5' bed. This will give you the base rails and hitch needed for your truck that is compatible with the Lippert Turning Point pin box.

I also recommend adding the Bargman 5th Wheel/Gooseneck 90-Degree Wiring Harness # 50-97-410-010. This will allow you to move a 7-way connector up into the bed of your truck for easier hook up of your 5th wheels wiring, while retaining use of your factory 7-way at the rear of your truck.

One thing to note. While using a fixed hitch with a rotating pin box is the best way to have the most clearance possible in a 5.5' bed, you may still not be able to make a complete 90 degree turn. I would take it slow and careful on your first few turns to ensure you have the proper clearance. It may even be beneficial to have a buddy outside of the truck the first few times as an extra set of eyes to ensure your 5th wheel does not contact the cab of your truck when turning.

expert reply by: Scott S