Trailer Brake Controller Wiring Harness for 2013 Ford F150
Updated 06/25/2013 | Published 06/24/2013
Question:
Does this fit a 2013 ford f150?
asked by: Mike
Helpful Expert Reply:
According to Tekonsha, the # 22292 wiring adapter is indeed the correct item to install a brake controller on your 2013 Ford F150. Keep in mind that if your truck was not equipped with the factory tow package, including the OEM 7-way, you might be missing some fuses or relays in the fuse box to fully activate the tow package. You would need to see your Ford dealer for the appropriate relays. If you have the OEM 7-way, the installation should be a plug-and-play proposition.
The connector for the brake controller is typically clipped to the back of the small cubbyhole on the dash where the OEM brake controller would be installed as shown in the photo I provided for you, but sometimes it is under the dash to the right of the diagnostic port as shown in the video I linked you to.
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Brake Controller
- Q&A: Where Does a Trailer Brake Controller Plug In on a 2013 Ford F-150
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Trailer Wiring Diagrams
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Brake Controller Wiring for Ford E-450 Motorhome
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: Brake Controller that Fits 2024 Motorhome on E350 Cutaway Chassis
- Q&A: Parts Needed to Add 7 Way Connector to 2013 Ford F-150 XL
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Replacement Sensor for TST Tire Pressure Monitor System
- Q&A: Recommended 7-Way Trailer Connector for a 2014 Ford F-150 w/out the Factory Towing Package
- Article: 5 Things to Know About Weight Distribution Hitches