Will the 7K Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles Work with 6-Bolt Wheels
Updated 10/18/2021 | Published 10/16/2021
Products Featured in This Question
Question:
can you run a 6 with a 4 drop
asked by: Arnold
0
Expert Reply:
If you're asking whether or not you can use 6-bolt wheels on the Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles part # 8327860 then the answer is yes as the 14125A outer bearing this axle uses is interchangeable with the 15123 outer bearing 6-bolt hubs use. I recommend the Dexter Trailer Hub and Drum Assembly part # 8-201-9UC3-EZ which would then work well with the Dexter Nev-R-Adjust Electric Trailer Brake Kit part # 23-464-465.
expert reply by:
Conner L
0
Product Page this Question was Asked From
Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles - 95" Long - 7,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- No Hubs
- 7000 lbs
- Spindles Only
- 79-1/4 Inch Spring Center
- 95 Inch Hub Face
- Drop - 4 Inch
- Dexter
more information >
Continue Researching
- Q&A: Looking for Replacement Dexter BrakeRite Actuator
- Q&A: Comparing Dexter And etrailer Brand 6,000 lb Axles
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: What is Needed to Upgrade From 3,500 lb to 5,200 lb Axle
- Q&A: Oil Seal for Dexter 12K Heavy Duty Axle with Disc Brakes
- Q&A: Recommended 95 Inch Trailer Axle with 78 Inch Spring Seat Locations
- Q&A: Upgrading a 5,200 lbs Axle to a 7,000 lbs Axle
- Article: Double-Eye Trailer Suspension System Review
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Top Gifts for Dads in 2024
- Article: How to Measure a Trailer Axle
- Article: Trailer Wiring Diagrams