Will the Curt Front Mount Hitch 31352 Fit a 2004 Ford F-150?
Published 09/21/2021
Question:
If the the numbers are correct, I will order one for my 2004 Ford F150 Lariat crew cab 4X4 with 2 inch lift kit. What is the distance between the bolt holes from the passenger side to the driver side? They need to be 33 inches. The distance between the bolts on each side need to be 3 inches. Also, since the tow hooks need to be removed, I assume they will bolt back into the same holes they came out of except on top of the hitch plates? Thanks a bunch
asked by: Gerry W
Expert Reply:
The Curt Front Mount Hitch # 31352 is specifically designed to fit F-150 Trucks from 2004 to 2008 and will measure 33-3/16 inches from the center to center of the bolts across the hitch, and then 3 inches between the first and second bolt holes, and then 3-1/8 inches between the second and third bolt holes on the frame brackets.
The tow hooks do indeed need to be removed, but will be installed again when installing the # 31352. They will actually sandwich the hitch between them and the frame of your truck and will use the existing hardware from the tow hooks.
(click to enlarge)
Product Page this Question was Asked From
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
- Front Receiver Hitch
- Concealed Cross Tube
- 500 lbs Vert Load
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Can the Center Knockout Panel be Re-Installed After a Trailer Hitch on a 2015 Cadillac SRX
- Q&A: Is Fascia Trimming Required to Install a Front Mount Receiver on a 2005 Ford F-150 4x4
- Q&A: Recommended Factory Replacement Hitch for a 2000 Ford Excursion
- Q&A: Recommended Trailer Hitch Receiver For 2000 Ford Excursion
- Q&A: Procedure for Flat Towing 2007 Ford F-150 Behind Motorhome
- Q&A: Why Are There Extra Hitch Pin Holes on the Gen-Y Adjustable 2-Ball Mount 325-GH-524
- Q&A: Trailer Lights Not Fully Working on a Trailer Towed by a 2007 Ford F-150 with Factory Tow Package