Parts Needed to Install a Prodigy P2 Brake Controller on a 2003 Chevy Silverado
Published 05/17/2013 >
Question:
1. Do you have an install video for this vehicle? 2. What is the correct part number for the wiring harness? 3. Where do I find if it has factory wiring and where is the plug located?
asked by: Lewis G
Expert Reply:
To see everything you will need to do to install a Prodigy Brake Controller # 90885 on your 2003 Chevy Silverado you will want to check out the FAQ article I attached.
If you have a factory 7-way at the rear of your vehicle you will simply need a Tekonsha Plug-In Wiring Adapter # 3015-P and then you will need to plug that into the port under your dash to complete the install. The port will be under your dash in a junction box to the left of the brake pedal.
If you do not have a factory 7-way you will need to do some more wiring. To see what is required check out the FAQ I attached. Basically you will need a Universal Brake Controller Install Kit # ETBC7.
I attached install instructions for the # ETBC7.
To see an install video check out the link I provided.
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Shop: Twist-in, 7-Pole, RV-Style Trailer Connector for Chevy and GMC Vehicles - Vehicle End
- Shop: Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way and 4-Pole Flat Connectors
- Q&A: Replacement 7-Way Trailer Connector for a 2003 Chevy Silverado
- Video: Trailer Brake Controller Installation - 2003 Chevrolet Silverado


