Is There a Hitch Available for a 2013 Rushmore 5th Wheel Trailer?

Published 08/26/2021

Products Featured in This Question

Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver - Weld On - Class V - 2"

(46)

$236.78

Multi-Fit Motor Home Trailer Hitch, 47" - 71" wide

(110)

$412.00

Curt RV Bumper 2" Trailer Hitch Receiver

(821)

$116.94

Question:

Do you have a hitch available for my application?

asked by: Larry

Expert Reply:

We definitely have options for adding a hitch to the back of your 2013 Rushmore 5th wheel. We do have a few different attachment styles as well, so I have two options below.

First, and the way I recommend going, will be the Draw-Tite Multi-Fit Trailer Hitch # 82201. This is rated to hold up to 350 pounds of tongue weight and can be used to tow 3,500 pounds as well, which in your case I do not recommend doing. This can also be installed on a motor home, hence the towing rating. It will also fit frames that are 47 inches to 71 inches wide, making it extremely adaptable. The only downside with this is that it will most likely sit fairly far back under the body, so an extension may be needed.

The other option will be a bumper mounted hitch. The overall capacity of this style hitch will depend on the bumper on your 5th wheel, however. As an example, the Curt RV Bumper 2" Trailer Hitch Receiver # E-100 will bolt around a 4x4 bumper. This will have the exact same capacities as the # 82201, but again, if your bumper is rated lower, the hitch will be as well. The plus with this style hitch is that you will not need any kind of extension due to where it will sit on the bumper.

expert reply by: Lazer S